<Maintenance>

The cleaning functions are listed with descriptions. Default settings are marked with a dagger (


Asterisks () Settings marked with an asterisk () may not be displayed depending on the model you are using, options, or other setting items.

<Clean Fixing Assembly (Reduce Paper Back Side Stain)> *

Clean the fixing assembly when the edge or back side of the printout is smudged. Cleaning the Fixing Assembly

<Clean Fixing Assembly>

Clean the fixing assembly after a toner cartridge is replaced or if black streaks appear on printouts. Cleaning the Fixing Assembly

<Clean ITB>

Clean the transfer belt inside the machine to prevent the print quality from deteriorating. Cleaning the Transfer Belt (ITB)

<Clean Feeder> *

Clean the feeder rollers if originals become dirty after being fed through the feeder. Cleaning the Feeder

<Control Condensation>

When the temperature changes rapidly in the environment where the machine is installed, condensation occurs, which may cause fading or bleeding in images and text. Select <On> to remove dew condensation in the machine. When selecting <On>, specify whether to restrict jobs.

<Off>

<On>

/<Allow Job Printing During Process>

<Menu>

<On>

Check the message

<OK>

Select the item

<Yes>


While condensation removal is being performed, printing may not be performed properly and blank paper may be output. If you set to <On>, you need to keep the machine turned ON to maintain the effect of condensation removal.