Importing a Configuration Profile
This explains the procedure for importing an exported configuration profile file (*.typ) and setting the device information.
If you cannot acquire the device information, you can apply it by importing a configuration profile exported in an environment where the information could be acquired.
IMPORTANTIf a configuration profile suitable for the device you are using is not selected, some of the device functions may not be usable.
Prerequisites
Settings at the device
If the device is connected via a WSD port, [Use WSD Browsing] is already set to on.
If the device is connected by specifying a standard TCP/IP port, [Retrieve Printer Mngt. Information from Host] is already set to on.
For details, refer to the manual of the device.
When starting the computer, log on as a user with administrator privileges.
Procedures
1.
Display the printer properties screen.
(1) Display [Bluetooth & devices] (or [Devices]) from [
Settings] in the Start menu.
Settings] in the Start menu.(2) In [Printers & scanners], display the management screen for the device to set.
To display the management screen, click the device or click [Manage] for the corresponding device.
(3) Click [Printer properties] for the device to set.
2.
Display the [Device Settings] sheet → click [Change].
3.
Select [Select Manually] → click [
] (Import Configuration Profile).
] (Import Configuration Profile).
4.
Select the configuration profile file to import → click [Open].
5.
Click [OK] → click [OK] in the [Device Settings] sheet.