(Settings/Registration) 
<Function Settings> <Copy><Copy>
This section describes how to specify the copy settings.
<Register/Edit Favorite Settings>
(Settings/Registration) <Function Settings> <Copy>You can register a combination of settings frequently used when copying to a single button. You can also assign a name to the button. Registering a Combination of Frequently Used Functions
<Display Confirmation for Favorite Settings>
(Settings/Registration) <Function Settings> <Copy>You can select whether to display a confirmation screen when recalling "Favorite Settings."
<Change Default Settings>
(Settings/Registration) <Function Settings> <Copy>You can change the settings registered as default for the <Copy> function. Customizing the Basic Features Screen
<Register Options Shortcuts>
(Settings/Registration) <Function Settings> <Copy>You can register/change modes in the shortcut keys displayed on the Copy Basic Features screen. This feature is useful when you want to register functions frequently used from <Options> and <Favorite Settings>.
 |
Shortcuts are registered separately for <Regular Copy> and <Express Copy>. <Regular Copy> and <Express Copy> can be switched in <Copy Screen Display Settings>. Five shortcuts can be registered to <Regular Copy> and six shortcuts can be registered to <Express Copy>. |
<Auto Collate>
(Settings/Registration) <Function Settings> <Copy>If this setting is set to <On>, the machine can automatically switch to <Collate (Page Order)> for the finishing mode when originals are placed in the feeder. You can also set <Offset> if an optional product that supports the Offset mode is attached to the machine. This is useful when making multiple sets of copies, because you do not need to remember to select the Finishing mode.
|
When an output tray that does not support the Offset mode is selected in the output tray settings, the copies will not be output to the output tray according to the specified settings if <Offset> is enabled. Perform one of the procedures below to solve this problem. Disable <Offset at Same Time> in the auto collate settings. Specify an output tray that supports the Offset mode in the output tray settings. <Output Tray Settings> Manually disable <Collate> before executing the job. |
<Auto Recognize Original Orientation>
(Settings/Registration) <Function Settings> <Copy>When this setting is set to <On>, the image to copy is automatically rotated 90 degrees according to the orientation of the paper if the orientation of the original differs from the orientation of the paper that is loaded in the machine.
|
In the following cases, Auto Orientation is not performed even if you select <On>: 120 V machine: If you are enlarging LTR or STMT originals onto 11" x 17" or LGL copy paper If <Different Size Originals> is enabled and <Select Paper> is set to <Auto> 230 V machine: If you are enlarging A4, B5, or A5 originals onto A3 or B4 copy paper If <Different Size Originals> is enabled and <Select Paper> is set to <Auto> Only the images of standard size originals up to A4 or LTR size can be rotated when the copy ratio is set to 100%. |
<Photo Printout Mode>
(Settings/Registration) <Function Settings> <Copy>You can enable the Printed Image mode. If this mode is set to <On>, you can select <Printed Image> or <Photo Printout> for the image quality when copying.
<Register Remote Device for Cascade Copy>
(Settings/Registration) <Function Settings> <Copy>You can register a printer for cascade copying, and check the information for and delete registered printers. Copying with Two Canon Multifunction Printers (Cascade Copy)
 |
If <Use IPv4> in <IPv4 Settings> in <Preferences> is set to <Off>, you cannot register a cascade copy printer. |
 |
Set the same Department ID and PIN as the machine for the cascade copy printer. (See Setting the Department ID Management.) You cannot delete a cascade copy printer while cascade copying with the printer. You can register up to seven cascade copy printers. |
<Cascade Copy Communication Timeout>
(Settings/Registration) <Function Settings> <Copy>You can set to suspend cascade copying when there is no response from the cascade copy printer for a certain period of time. You can set the time from 5 seconds to 30 seconds, in 1 second increments.
|
Jobs that timeout (.jobs that are not received by the cascade copy printer) are deleted. |
<Speed Priority for Copying from Feeder>
(Settings/Registration) <Function Settings> <Copy>You can give a priority to speed over accuracy when copying from feeder.
<Job Separator Between Groups>
(Settings/Registration) <Function Settings> <Copy>When copying two copies or more with <Group (Same Pages)> in <Finishing>, you can insert sheets between each page group. If you select <On>, select a paper source.