Specifying Paper Size and Type in the Paper Drawer

1
Load the paper in the paper drawer. Basic Paper Loading Method
2
Press  (Settings/Registration).
3
Press <Preferences>  <Paper Settings>  <Paper Settings>.
4
Check the paper size that is displayed.
120 V machine
230 V machine
When loading standard size paper, the paper size is automatically detected.
The paper sources are represented by the following icons, respectively. Note that the paper source indications differ depending on the options installed.
: The paper drawer 1
: The paper drawer 2
: The paper drawer 3
: The paper drawer 4
If the displayed paper size is different from the loaded paper size, the paper may not be loaded properly. Load the paper again.
Even when paper is loaded correctly, some small standard sizes may not be detected correctly. In this case, press <Unrecognized Standard Size> and select the paper size. Automatically Detectable Paper Sizes
If <Custom> is displayed even though the standard size paper is loaded, press <Custom Size>  <Cancel Settings>. The correct size will be displayed.
When loading custom size paper
When loading envelopes
When loading other size paper (for the 230 V machine only)
When loading paper of the size that is standard but cannot be detected automatically
5
Select the paper source in which paper is loaded and press <Set>.
120 V machine
230 V machine
6
Select the paper type and press <OK>.
If the paper type loaded is not displayed, press <Detailed Settings> to select from a list.
If the paper type of the paper that you have loaded is not listed on the detailed setting screen, you can register it in the paper type list. Paper Type Management Settings
7
Press <OK>.
8
Change the paper size label of the paper drawer as necessary. Attaching the appropriate paper size label
69L8-02R