Copying a Facing Page Original as Two Separate Pages
| | You can copy an original with two facing pages such as books and magazines into separate pages, dividing the left and right pages. You can make 2-sided copies as well by copying the right page onto the front side and the left page onto the back side. |
|
When scanning facing pages of a book or bound original, place the original on the platen glass. Place it face down with its corner aligned with the top-left corner of the platen glass, as shown below. |
Copying a Facing Page Original onto Two Sheets of Paper
1
Place the original.
Placing Originals2
Press <Copy>.
<Home> Screen3
Press <Options> on the Copy Basic Features screen.
Copy Basic Features Screen4
Press <Book
2 Pages>.
5
Press
<Close>.
6
Press
(Start).
Copying starts.
Copying a Facing Page Original onto Both Sides of One Sheet of Paper
1
Place the original.
Placing Originals2
Press <Copy>.
<Home> Screen3
Press <Options> on the Copy Basic Features screen.
Copy Basic Features Screen.
4
Press <2-Sided>
<Book
2-Sided>.
5
Check and change the setting according to your original type.
If you want to change the setting, press <Set Details>.
<Book 2-Sided Type> If you select <Left/Right
2-Sided>, the left and right pages of the facing page original are copied separately onto both sides of one sheet of paper.
If you select <Front/Back
2-Sided>, the front side and back side of one page of the facing page original are copied onto both sides of one sheet of paper.
6
Press <OK>
<Close>.
7
Press
(Start).
Scanning starts.
To scan the next page, place the original and press
(Start). After scanning all of the originals, proceed to step 7.
8
Press <Start Copying>.
Copying starts.