The settings about print appearance including gutter margins and print positions are listed with short descriptions. Default settings are marked with a dagger (). |
1 to 9999 |
-50.0 to 0.0 to +50.0 (mm) |
<Offset Y> | <Offset X> |
Specifying fine settings for the print position |
You can select <Adj. Print Position> under <User Maintenance> to finely specify the print position for each paper source. The range of available offset values is from -5.0 mm to +5.0 mm. Adjusting Print Position |
Long Edge Short Edge |
-50.0 to 0.0 to +50.0 (mm) |
Setting Value | Long edge binding | Short edge binding |
"+" value | Left end of paper (for left binding) | Upper end of paper (for top binding) |
"-" value | Right end of paper (for right binding) | Lower end of paper (for bottom binding) |
Setting Value | Long edge binding | Short edge binding |
"+" value | Left end of paper (for top binding) | Upper end of paper (for right binding) |
"-" value | Right end of paper (for bottom binding) | Upper end of paper (for right binding) |
Off On |
When the printing of a document consisting of an even number of pages finishes in 1-sided printing modeIn the following cases, the last page is processed in 1-sided printing mode even if the document consists of an even number of pages. The last page is blank. The last page cannot be printed for a reason such as the paper size is not available for 2-sided printing. When paper with preprinted logo is usedIf the last page is processed in 1-sided printing mode with <Alternative Method> to <On>, the orientation or print side of the last page may not match those of other pages. In this case, set <Alternative Method> to <Off>. |