<Printer>

This section describes the printer settings.

<Output Report>

(Settings/Registration)

You can print reports for the machine settings.

<Printer Settings>

(Settings/Registration)

Specify the printer settings.

For more information, see Setting the Machine (PS/PCL/UFR II Printer).

<Restrict Printer Jobs>

(Settings/Registration)

If this setting is set to <On>, you can restrict jobs from the printer driver.

<PDL Selection (Plug and Play)>

(Settings/Registration)

Select default Page Description Language (PDL).

<Paper Feed Mode for Printer Driver Jobs with MP Tray>

(Settings/Registration)

You can set whether to prioritize the printer driver settings or the paper settings in the machine when printing a job with the multi-purpose tray specified as the paper source. In addition, if you prioritized the settings in the machine, set the paper feed mode for when free size paper is set in the multi-purpose tray.


When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray: If paper is loaded in the multi-purpose tray If this setting is set to <On> If <Multi-Purpose Tray Defaults> is set to <Use Preset> If the paper size specified in the printer driver greatly differs from the paper size set in the multi-purpose tray, an error message is displayed. Take note of the following when free size paper is set for <Mode A (Prioritize Printer Driver Settings)>. When printing on envelopes, be sure to specify the paper type on the printer driver. If it is not specified, printing may not be performed. A paper jam or another printing problem may occur if the paper type is not specified when printing on other type of paper.

When the following conditions are met, you can press <Temp. Change Ppr. in MP Tray> on the paper selection screen of <Copy> and <Access Stored Files> to change the paper size/type to load from the multi-purpose tray:

If paper is loaded in the multi-purpose tray

If this setting is set to <On>

If <Multi-Purpose Tray Defaults> is set to <Use Preset>

If the paper size specified in the printer driver greatly differs from the paper size set in the multi-purpose tray, an error message is displayed.

Take note of the following when free size paper is set for <Mode A (Prioritize Printer Driver Settings)>.

When printing on envelopes, be sure to specify the paper type on the printer driver. If it is not specified, printing may not be performed.

A paper jam or another printing problem may occur if the paper type is not specified when printing on other type of paper.

<Envelope Flap Length Settings>

(Settings/Registration)

You can set the flap length when Nagagata 3 envelopes are loaded vertically (with the flap on the far side) in the multi-purpose tray.


In order to change this setting, <Paper Feed Mode for Printer Driver Jobs with MP Tray> must be set to <On>. This setting is applied in the following cases: If Nagagata 3 envelope is specified in the printer driver If the multi-purpose tray is set as the paper source when sending the job from the printer driver If <Prioritize Printer Driver Settings for Jobs with MP Tray> is set to <On>

<PS Password Settings>

(Settings/Registration)

You can specify the password that restricts the use of the control command prepared by the PS printer.


<SystemParamsPassword> is a password that allows changes to the system parameter, and <StartJobPassword> is a password that allows startjob, exitserver operator to perform. For more information, check PostScript language specifications.

<Paper Feed Mode When Using PCL Emulation>

(Settings/Registration)

You can set the paper source used for the PCL5 PaperSource command.


For details on each setting, see Setting the Machine (PS/PCL/UFR II Printer).