Optional Equipment Supporting Specific Functions
The optional equipment enabling you to use the finishing functions of the machine are as follows. Install items of optional equipment that are relevant to the functions you want to use.
Using the Sorting Functions
Function | Staple Finisher-W PRO | Booklet Finisher-W PRO | Staple Finisher-X | Booklet Finisher-X | Staple Finisher-V | Booklet Finisher-V | Paper Folding Unit-J | Copy Tray-R |
Collate |  | | | | | | - | |
Group | | | | | | | - | |
Offset | | | | | | | - | |
Rotate 90 Degrees | - | - | - | - | - | - | - | |
Using the Stapling Function
Function | Staple Finisher-W PRO | Booklet Finisher-W PRO | Staple Finisher-X | Booklet Finisher-X | Staple Finisher-V | Booklet Finisher-V | Paper Folding Unit-J | Copy Tray-R |
Staple + Collate (Corner/Double) | | | | | | | - | - |
Staple + Collate (Saddle Stitch) | - | | - | | - | | - | - |
Staple + Group (Corner/Double) | | | | | | | - | - |
Staple-Free (Corner) | - | - | - | - | | | - | - |
Manual Staple (Corner) | - | - | - | - | | | - | - |
Trim | - | *1 | - | *2 | - | - | - | - |
*1 Can be used only when "Booklet Trimmer-F" is installed.
*2 Can be used only when "Inner Booklet Trimmer-A" is installed.
Using the Folding Function
Function | Staple Finisher-W PRO | Booklet Finisher-W PRO | Staple Finisher-X | Booklet Finisher-X | Staple Finisher-V | Booklet Finisher-V | Paper Folding Unit-J | Copy Tray-R |
Z-Fold | - | - | - | - | - | - | | - |
C-Fold | - | - | - | - | - | - | | - |
Half Fold | - | - | - | - | - | - | | - |
Accordion Z-Fold | - | - | - | - | - | - | | - |
Saddle Fold | - | | - | | - | | - | - |
Double Parallel Fold | - | - | - | - | - | - | | - |
Using the Hole Punching Function
Function | Staple Finisher-W PRO | Booklet Finisher-W PRO | Staple Finisher-X | Booklet Finisher-X | Staple Finisher-V | Booklet Finisher-V | Paper Folding Unit-J | Copy Tray-R |
Hole Punch | *1 | *1 | *2 | *2 | *3 | *3 | - | - |
*1 Can be used only when "Puncher Unit-BS," "Puncher Unit-BT,"or "Puncher Unit-BU"is installed.
*2 Can be used only when "Puncher Unit-BF," "Puncher Unit-BG," or "Puncher Unit-BH" is installed.
*3 Can be used only when "2/3 Hole Puncher Unit-A," "2/4 Hole Puncher Unit-A," or "4 Hole Puncher Unit-A" is installed.
NOTE |
For details on these functions, see Functions Useful for Making and Managing Material. Finishing functions may not be available depending the paper type. Available Paper |