Feeder cover

Open this cover when removing documents jammed in the feeder. Document Jams in the Feeder

Document set indicator

Lights up when documents are placed in the document supply tray.

Document supply tray

Documents placed here are automatically fed into the feeder. When two or more sheets are loaded, documents can be scanned continuously. Placing Documents

Document supply tray extension

Pull out this tray when loading a large-sized document.

Document output tray extension

Pull out this tray when scanning large-sized documents to prevent them from dropping over the edge of the feeder. The tray can be extended to two different lengths depending on the document size.

Document output tray

Scanned documents are output here.

Document guides

Adjust these guides according to the width of a document.

Document output indicator

Lights up while documents are being scanned. After scanning is complete, the indicator blinks for a specified period, preventing the user from leaving the documents on the machine.

Scanning area

Documents placed in the feeder are scanned in this area.

Scanning area cover

Open this cover when replacing a stamp cartridge or cleaning the scanning area. Maintenance

Platen glass

When scanning books, thick documents, thin documents, and other documents that cannot be scanned using the feeder, place them on the platen glass. Placing Documents
If a thick document such as a book or magazine is placed on the platen glass, do not press down hard on the feeder.
Do not place any objects in the document output area. Doing so may cause damage to the documents.
Regularly clean the feeder and platen glass in order to obtain proper print results. Regular Cleaning
The Stamp mode is available when the optional Stamp Unit-B* is attached to the feeder.