Loading Pre-Punched Paper

You can load pre-punched paper to the following paper source:
Paper drawers of the main unit
Stack Bypass-C
POD Deck Lite-C / POD Deck Lite XL-A
Multi-drawer Paper Deck-C
Document Insertion Unit-N
When loading pre-punched paper, take note of the orientation of the binding holes and the image.
When pre-punched paper is loaded in the paper drawer of the main unit, the side facing down is the one printed on.
When pre-punched paper is loaded in the Stack Bypass-C, POD Deck Lite-C / POD Deck Lite XL-A, or Multi-drawer Paper Deck-C, the side facing up is the one printed on.
IMPORTANT
If you are making one-sided prints, select [Face Up (Reverse Order)] in [Face Up/Face Down]. (See "Sætsortering af kopier.")
If you want to output prints with the printed face down, select plain paper with horizontal (landscape) orientation in [Select Paper]. (See "Valg af papir.")
52SK-0R1