System Options

By installing system-related options, you can further enhance the performance of the machine.

This option enables you to use the machine as a PS printer.

imagePRESS Server is a printer controller which attaches to the back of the machine. imagePRESS Server supports Adobe Genuine PostScript 3 and PCL5e, and is suited for office environments in which larger print volumes are frequently processed, or for users who use Adobe PostScript or other PostScript applications.

For information on restrictions when the imagePRESS Server is attached, see Restrictions When Connecting to imagePRESS Server.

This option enables you to print barcodes. For more details, see Bar Code Printing via the online manual site.

This option enables you to add the following fonts for a PCL printer. As a result, you can output using multiple languages in a SAP Unicode environment.

In order to support differences in character design depending on the region, four font versions are enabled.

The "Super G3 FAX Board" enables you to send and receive faxes. You can also send documents that are created in applications directly from your computer via the network. Faxing

This option is needed to use the Remote Fax function. Even if your machine is not equipped with the fax board, you can send fax documents via another machine with the fax board on the same network. Using Remote Faxes

Enables you to use IP Fax, a function to send and receive faxes in a TCP/IP network such as an office LAN. As devices send and receive faxes within the network, you can reduce the transmission cost. The transmission speed of IP Fax is faster than conventional fax transmissions. For more details, see IP FAX Expansion Kit User's Guide via the online manual site.

This option enables you to hear voice navigation instructions when operating the machine.

The 2.5inch/250GB HDD is necessary when using the Mirroring function of the HDD Mirroring Kit. Using as a Simple File Server

By replacing the hard disk installed in the machine with the 2.5inch/1TB HDD, you can expand the memory capacity of the machine to 1 TB. Once you replace the hard disk with the 2.5inch/1TB HDD, the additional 2.5inch/1TB HDD is required to back up the data by using the HDD Mirroring Kit. Using as a Simple File Server

The HDD Mirroring Kit enables you to back up the data on the hard disk of the machine to the additional optional HDD. Even if one storage device should fail, you can access the other storage device to reduce the risk of data loss.

This option enables Bluetooth communication between the machine and mobile devices. Connecting Directly

This option enables you to perform Department ID Management through authentication with control card. For details, see Copy Card Reader

products may be required, depending on the file format and function you want to use. See the following table.