<Status Monitor> Screen

When you press <Status Monitor>, a screen appears in which you can check the progress of documents as well as the status of the machine and network setting information.

<Error Information/Notification>

Displays the details of any errors that occurred. For more information, see "Troubleshooting (FAQ)" on the online manual website.

<Device Information>

Displays the status of the machine.

<Paper Information>
Displays whether paper is loaded in each paper source.

<Cartridge Information>
Displays the amount of toner remaining in the toner cartridges. Other internal parts may reach the end of their lifetime before the toner runs out.

<Check Counter>
Displays the total volume of printouts. Viewing the Counter Value

<Secure Print Memory Usage>
Displays the amount of memory currently used for storing secured document data. Printing a Document Secured by a PIN (Secure Print)

<Version Information>
Displays firmware version information.

<Serial Number>
Displays the serial number of the machine.

Status and logs of copied, printed, and sent/received documents

Displays the current status of the selected item. The <Copy/Print Job> screen is shown below as an example.

<Network Information>

Displays the network settings such as the IP address of the machine and status such as the condition of wireless LAN communications. Viewing Network Settings

IP Address

Displays the IPv4 address of the machine.

You can specify whether to display the IP address on the <Status Monitor> screen by setting <Display IP Address>. <Display IP Address>

<Rmv. Mem. Media>

Used to safely remove a USB memory device. This is only displayed when a USB memory device is connected to the machine. Remove the USB Memory Device