<Display Settings>

All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger ().
<Default Screen After Startup/Restoration>
<Home Screen Button Display Settings>
<Language>
<Remote UI Language>
<Notify to Clean Orig. Scan Area>
<Millimeter/Inch Entry Switch>
<Display Timing for Cart. Prep.>
<Display Notif. to Clean Fixing Assembly>
<Show Warnings>
<Action When Warning>
<Display IP Address>
Asterisks (*)
Settings marked with "*1" may not be displayed depending on the model you are using, options, or other setting items.
Settings marked with "*2" cannot be imported or exported.
Settings marked with "*3" may be unavailable or vary or have different defaults depending on your country or region.

<Default Screen After Startup/Restoration>

By default, the Home screen is displayed immediately after the machine is turned ON or when the Auto Reset function is performed. Specify the setting to change the default screen and display the main screen of a different function. If you specify <Status Monitor>, also specify the screen to display after exiting the <Status Monitor> screen.
<Home>
 
<Copy>
 
<Fax>*1
 
<Scan>
 
<Secure Print>
 
<Status Monitor>
<Home>
<Copy>
<Fax>*1
<Scan>
<Secure Print>

<Home Screen Button Display Settings> *2

Configure the settings for the buttons displayed in the Home screen. You can select the settings that will be displayed as shortcut buttons, rearrange the order in which the buttons appear, and insert or remove spaces. Customizing the Home Screen
<Select Button to Display>
<Favorite Copy Settings>
<Favorite Fax Settings>*1
<Favorite Scan Settings>
 
<Set Display Order>

<Language> *3

Select the display language used for the display, reports, and lists.
<Bahasa Melayu>
<Deutsch>
<English>
<Español>
<Français>
<Italiano>
<Português>
<Tiếng Việt Nam>
<ภาษาไทย>
<日本語>
<中文(繁體)>
<中文(简体)>
<한국어>

<Remote UI Language> *3

Select the display language used for the Remote UI screens.
<English>
<Japanese>
<French>
<Spanish>
<German>
<Italian>
<Portuguese>
<Chinese (Simplified)>
<Chinese (Traditional)>
<Korean>

<Notify to Clean Orig. Scan Area>

Specify whether to display a message when stains are detected in the document feed scanning area.
<Off>
<On>

<Millimeter/Inch Entry Switch>

Select the unit of measurement.
<Millimeter>
<Inch>

<Display Timing for Cart. Prep.>

Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
<Auto>
<Off>
<Custom>
<On>

<Display Notif. to Clean Fixing Assembly>

Select whether to display a message that prompts you to clean the fixing unit. If you set to <On>, you can specify the timing to display a prompt message for cleaning the fixing unit, in terms of the number of printed pages and in units of 1,000.
<Off>
<On>

<Show Warnings>

Specify whether to display a message telling that the amount remaining in the toner cartridges is low.
<Off>
<On>
When <Action When Warning> is set to <Stop Printing>, you cannot set this item to <Off>.
When <Continue Print. When Cart. Low> is set to <Off>, the message will appear even if you set this item to <Off>. <Continue Print. When Cart. Low>

<Action When Warning>

Specify whether to continue printing when the amount remaining in the toner cartridges is low.
<Low Cartridge Level>
<Continue Printing>
<Stop Printing>
If you change the setting of this item from <Continue Printing> to <Stop Printing>, <Show Warnings> is set to <On>.

<Display IP Address>

Specify whether to display the machine's IPv4 address on the <Status Monitor> screen. <Status Monitor> Screen
<Off>
<On>
5XE3-08H