Interface
 | All the settings about interfaces for communications with a computer and USB are listed with short descriptions. Default settings are marked with a dagger (  ). |
|
Asterisks (*)Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. |
Interface Selection
Select the interface used for the machine.
USB
Enable or disable the USB port. Restricting the USB Connection with a Computer
Off On |
Network
Enable or disable the LAN port. Disabling the LAN Port
Off On |
USB Adv. Functions
Specify settings for selecting a function to use a USB device or selecting a device driver to use.
Adv. Func. Settings
Select which of MEAP applications and USB over NW to be given priority when a USB device is connected to the machine.
Meap Priority USB Over NW Priority |
(
) 
<Interface> 
<Interface Selection> Check the message <USB Adv. Functions> <Adv. Func. Settings> <Meap Priority> or <USB Over NW Priority> Perform a hard reset (Performing a Hard Reset)
<Meap Priority>
Specify this to give priority to MEAP applications.
<USB Over NW Priority>
Specify this to give priority to USB over NW. This function enables you to use, from your computer, a USB device connected to the machine's USB port.
USB Storage Device
Specify settings for the device driver for using a USB memory device.
MEAP Driver
Enable or disable the MEAP specific device driver when a USB memory device is attached to the machine. When you want to perform the direct print function (USB Direct Print) from a USB memory device without using a computer, select <Off>.
Off On |
() 
<Interface> <Interface Selection> Check the message <USB Adv. Functions> <USB Storage Device> <MEAP Driver> <Off> or <On> Perform a hard reset (Performing a Hard Reset)Timeout
Specify how the machine should behave if receiving print data is interrupted.
Timeout
Select whether to cancel printing if print data receiving is interrupted for a specified period of time.
Off On |
() <Interface> <Timeout> <Timeout> <Off> or <On> Timeout Time *
Set the time period until a timeout error occurs.
5 to 15 to 300 (seconds) |
() <Interface> <Timeout> <Timeout Time> Use the numeric keys to set the time period Connection Recog.
A problem such as improper overlay printing or garbled characters may occur during printing via wired LAN connection. In this case, set <Connection Recog.> to <Off>.
Off On |
() <Interface> <Connection Recog.> Check the message <Off> or <On> Perform a hard reset (Performing a Hard Reset)Extended RX Buffer
Select whether to increase the space of the memory built in the machine for receiving print data from a computer. If you select <On>, the time until the computer will be freed from print data processing or transmission can be reduced when the computer sends a large volume of data or complicatedly structured data.
Off On |
() <Interface> <Extended RX Buffer> Check the message <Off> or <On> Perform a hard reset (Performing a Hard Reset)