<Copy>
All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger (
).
). |
Asterisks (*)Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items. |
<Change Default Settings (Copy)>
You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. Changing the Default Settings for Functions
<Number of Copies> 1 to 999<Paper Source> <Auto> <Multi-Purpose Tray> <Drawer 1> <Drawer 2> <Drawer 3>* <Drawer 4>* <Select Color> <Auto (Color/B&W)> <Full Color> <Black & White> <Density> Nine Levels <Adjust Background Density> <Auto> <Adjust (Manual)> Nine Levels <Density by Color> <Red>: Nine Levels <Green>: Nine Levels <Blue>: Nine Levels <Copy Ratio> Custom Ratio <100% Direct> <400% Max> <200% STMT->11x17> <129% LTR->11x17> <121% LGL->11x17> <78% LGL->LTR> <73% 11x17->LGL> <64% LTR->STMT> <50% 11x17->STMT> <25% Min> <Book->2 Pages> <Off> <On> <2-Sided Printing>* <Off> <1-Sided->2-Sided> <2-Sided->2-Sided> <2-Sided->1-Sided> <Orig./Fin. Type> <N on 1> <Off> <2 on 1> <4 on 1> <Layout> <Original Type> <Text/Photo/Map> <Printed Image> <Text> <Different Size Originals> <Off> <On> <Finishing> <Off> <Collate (Page Order)> <Offset>* <Off> <On> <Group (Same Pages)> <Offset>* <Off> <On> <Staple>* <Corner> <Double> <Staple-Free (Max. 5 Sheets)> <Erase Frame> <Off> <Erase Original Frame> <Erase Book Frame> <Sharpness> Seven Levels <Color Balance> Yellow/Magenta/Cyan/Black 17 Levels <Fine Adjust> Yellow/Magenta/Cyan/Black <High>: 17 Levels <Medium>: 17 Levels <Low>: 17 Levels |
<Auto Collate> *
If you set this setting to <On>, finishing mode is switched between <Collate (Page Order)> and <Offset> automatically. This prevents you from forgetting to collate the output when making multiple copies.
<Off> <On> |
<Menu> 
<Function Settings> <Copy> <Auto Collate> Select <Off> or <On> 
<Function Settings> <Copy> <Auto Collate> Select <Off> or <On> |
If the setting for <Copy> <Other Settings> <Finishing> is other than <Off> from the Home screen, the setting for this item becomes disabled.As the offset function is performed, the output destination will be <Tray A> regardless of the setting for <Output Tray Settings>. |
<Auto Recognize Original Orientation>
If you set this setting to <On>, even if the orientations of your original and the paper set in the multi-purpose tray or paper drawer differ, the image of the original is rotated 90 degrees automatically according to the orientation of the paper when printing copies.
<Off> <On> |
<Menu> <Function Settings> <Copy> <Auto Recog. Orig. Orientation> Select <Off> or <On>
<Function Settings> <Copy> <Auto Recog. Orig. Orientation> Select <Off> or <On> |
If you are enlarging A4 or A5 originals onto A3 copy paper, Auto Orientation is not performed even if it is set to <On>. Only the images of standard size originals up to A4 size can be rotated when the copy ratio is set to 100%. |