Viewing Network Settings

The IP address is not correctly configured if it is displayed as "0.0.0.0".
Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network
You can print a list of the current network settings. User Data List/System Manager Data List

Viewing IPv4 Settings

<Status Monitor>  <Network Information>  <IPv4>  Select the setting to view  Check the settings

Viewing IPv6 Settings

<Status Monitor>  <Network Information>  <IPv6>  Select the setting to view  Check the settings

Viewing the MAC Address for Wired LAN

1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences>  <Network>.
If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Ethernet Driver Settings>.
MAC address is displayed.

Viewing the MAC Address and Information for Wireless LAN

1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences>  <Network>.
If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Wireless LAN Settings>.
If the <Do you want to enable the wireless LAN?> message is displayed, select <Yes>.
4
Read the message that is displayed, and select <OK>.
5
Select <Connection Information>.
6
Select the setting to view.
Viewing security information
To view WEP and WPA/WPA2-PSK information, select <Security Settings>.
Viewing from the <Status Monitor> screen
<Wireless LAN Status> and <Latest Error Information> can be viewed from <Status Monitor>.
<Status Monitor>  <Network Information>  <Network Connection Type>  Select the setting to view.
69J3-00L