All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger ().
Asterisks (*)
Settings marked with an asterisk (*) may not be displayed depending on the model you are using, options, or other setting items.

<Change Default Settings (Copy)>

You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. Changing the Default Settings for Functions
<Number of Copies>
1 to 999
<Paper Source>
<Multi-Purpose Tray>
<Drawer 1>
<Drawer 2>
<Drawer 3>*
<Drawer 4>*
<Select Color>
<Auto (Color/B&W)>
<Full Color>
<Black & White>
Nine Levels
<Adjust Background Density>
<Adjust (Manual)>
    Nine Levels
    <Density by Color>
        <Red>: Nine Levels
        <Green>: Nine Levels
        <Blue>: Nine Levels
<Copy Ratio>
Custom Ratio
<100% 1:1>
<400% Max>
<200% A5->A3>
<141% A4->A3>
<70% A3->A4>
<50% A3->A5>
<25% Min>
<Book->2 Pages>
<2-Sided Printing>*
<Orig./Fin. Type>
<N on 1>
<2 on 1>
<4 on 1>
<Original Type>
<Printed Image>
<Different Size Originals>
<Collate (Page Order)>
<Group (Same Pages)>
<Eco (Max. 5 Sheets)>
<Erase Frame>
<Erase Original Frame>
<Erase Book Frame>
Seven Levels
<Color Balance>
17 Levels
<Fine Adjust>
<High>: 17 Levels
<Medium>: 17 Levels
<Low>: 17 Levels

<Auto Collate> *

If you set this setting to <On>, finishing mode is switched between <Collate (Page Order)> and <Offset> automatically. This prevents you from forgetting to collate the output when making multiple copies.

<Auto Recognize Original Orientation>

If you set this setting to <On>, even if the orientations of your original and the paper set in the multi-purpose tray or paper drawer differ, the image of the original is rotated 90 degrees automatically according to the orientation of the paper when printing copies.