<Adjust Action>
Specify the settings for adjusting the machine's actions.
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
<Saddle Stitch Staple Repositioning> *
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action>Feeds papers to the saddle stitcher unit and staples them several times, and performs the saddle stitch staple repositioning procedure. The machine performs this adjustment procedure if stapling has not been performed after you clear a staple jam or replace the staple cartridge.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Saddle Stitch Staple Repositioning> | <Start> | Yes | Yes | No | No | No | - |
 |
Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine. 305 mm x 457 mm, A3, B4, A4R, 11" x 17", LGL, LTRR, or custom paper sizes equivalent to these paper sizes can be used. (Make the paper source to which transparencies are registered unavailable.) |
<Change Fold/Stitch Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error. Adjust the folding position of the paper and the saddle stitch position at the same time. Adjusting the Saddle Stitch Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Change Fold/Stitch Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Stitch Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the fold placement to compensate for this error. This mode enables you to adjust the folding position without changing the stapling position. Adjusting the Saddle Stitch Folding Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Saddle Stitch Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Switch Finisher Puncher Mode> (C7700 Series / C5700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether to give priority to the punching speed or to precision.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Switch Finisher Puncher Mode> | <Speed Priority>, <Precision Priority> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
<Color/B&W Priority for First Print Time> (C7700 Series Only)
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether priority is given to color or black-and-white printing for the first print time.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Color/B&W Priority for First Print Time> | <Color Priority>, <Black & White Priority> | No | No | No | No | B | Settings/Registration Basic Information |
|
The settings is only effective after the first job is processed and you have restarted the machine (by turning the main power switch OFF and then ON again). For instructions on restarting (turning the main power switch OFF and then ON) the machine, see Turning ON the Machine. |
<Adjust Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the paper folding position. Adjusting the Saddle Stitch Folding Position
C7700 Series(without paper folding unit) / C5700 Series / C3700 Series only
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
C7700 Series(with paper folding unit) only
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Fold Position> | |||||||
<Adjust Z-Fold Position> | -2.0 mm to 0.0 mm to +1.5 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust C-Fold Position> | <A>: 0.0 mm to 6.0 mm (in 0.5 mm increments) <B>: 0.0 mm to 3.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Correct Curl for Each Paper Drawer> (C7700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>This mode enables you to adjust the curl correction level of each paper source.
The curl correction level is constantly adjusted to suit the characteristics of the paper. However, if the paper curl is not corrected properly, you can manually adjust the curl correction level to accommodate the environment and the characteristics of the paper, such as moisture in the paper. Curl Correction for Each Paper Drawer (C7700 Series Only)
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Correct Curl for Each Paper Drawer> | Face Up Output (Reverse)：-10 to 0 to +10 Face Down Output (Normal)：-10 to 0 to +10 | Yes | Yes | No | No | No | - |
<Time Until Stapling Starts in Stapler Mode> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set the time until stapling is performed after inserting paper when using manual stapling.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Time Until Stapling Starts in Stapler Mode> | 1 to 3 to 5 second | Yes | Yes | No | No | C | Settings/Registration Basic Information |
<Start Key Touch Recognition Delay>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>Adjust the touch time required to begin startup processing.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Start Key Touch Recognition Delay> | -1 to 0 to +7 | No | No | No | No | C | Settings/Registration Basic Information |
|
This setting does not appear on models with an upright control panel. |