FAX ACTIVITY REPORT TX/RX

A Communication Management Report can be printed either automatically or manually.

A Communication Management Report is automatically printed when either the number of communication results reaches 100, or a specified time is reached. The send and receive logs can also be printed separately.

The items printed for the report and a description of each item are indicated below.

DEPT. ID

If Department ID Management is set, the Department ID is printed. Transmission logs are listed according to Department ID.

ST. TIME

The date and time (in 24-hour notation) at which the document started to be transmitted or received are printed. An asterisk (*) indicates a job that has already been printed.

DESTINATION ADDRESS

The address of the recipient is printed.

If the job is sent to a file server (FTP, SMB, or WebDAV):

The path name is printed on the second line.

DESTINATION ID

The name of the recipient is printed.

JOB NO.

The four digit number, that is automatically assigned when the document is accepted for sending or receiving, is printed.

Numbers between 0001 and 4999 are for sending, while numbers between 5001 and 9999 are for receiving.

COMM. MODE

The type and mode of transmission are printed.

Transmission type: Send (TX), Receive (RX)

Mode of transmission: FTP, SMB, WebDAV, Mail Box (MAIL BOX), I-Fax (I-FAX), E-mail (E-MAIL)

PGS.

The number of pages that were sent or received is printed.

RESULT

Prints "OK," "NG," or "--."

If a send job is canceled, <STOP> is printed in the Results column on the Send report.

OK:	Sending was completed successfully. The communication time is also printed next to "OK."
NG:	Sending failed. The communication time and error code are also printed next to "NG."
--:	The machine was unable to confirm whether the e-mail message or I-fax you sent was actually delivered to the server or destination.

Automatically Printing the Communication Management Report

Manually Printing the Communication Management Report

NOTE
A list of e-mail, I-fax, file server, and Mail Box transmission logs is printed on the Communication Management Report. If a field exceeds its display capacity, only those characters that fit in the display are printed.

Automatically Printing the Communication Management Report

The Communication Management Report can be automatically printed.

Press

Press [Function Settings] → [Send] → [Common Settings].

Press [Communication Management Report].

Specify each setting → press [OK].

<Auto Print (100 Transmissions)>:

Press [On] to automatically print the Communication Management Report when the number of send and receive transmissions reaches 100.

<Specify Print Time>:

To print the report at a specified time, press [On] → enter the time using

(numeric keys).

Enter all four digits of the time (including zeros), using 24-hour notation.

Examples:	7:05 a.m. → 0705
	11:18 p.m. → 2318

If you make a mistake when entering the time, press

to clear your entry → enter another four digit number.

If the number of send and receive transmissions exceeds 100 before the specified time, a Communication Management Report of the most recent 100 transmissions is printed.

To print the send and receive logs separately, press [Separate TX/RX] to select it.

Manually Printing the Communication Management Report

You can manually print the Communication Management Report.

Press

Press [Job] → [Job Log].

Press the drop-down list → select the desired setting → press [Print List].

Press [Yes].

NOTE
If [Display Job Log] in [Management Settings] (Settings/Registration) is set to 'Off', [Communication Management Report] is not displayed. If [Display Job Log] in [Management Settings] (Settings/Registration) is changed from 'Off' to 'On', the following settings are switched to 'Off' automatically: Auto Print (100 Transmissions) Specify Print Time A list of e-mail, I-fax, and file server transmission logs is printed on the Communication Management Report. When the message <Check the printer. Call service representative.> is displayed to indicate that the Print function is unavailable, the machine automatically prints a Communication Management Report after it recovers from the problem. The latest 100 communication logs are printed on the report.

NOTE

If [Display Job Log] in [Management Settings] (Settings/Registration) is set to 'Off', [Communication Management Report] is not displayed.

If [Display Job Log] in [Management Settings] (Settings/Registration) is changed from 'Off' to 'On', the following settings are switched to 'Off' automatically:

Auto Print (100 Transmissions)

Specify Print Time

A list of e-mail, I-fax, and file server transmission logs is printed on the Communication Management Report.

When the message <Check the printer. Call service representative.> is displayed to indicate that the Print function is unavailable, the machine automatically prints a Communication Management Report after it recovers from the problem. The latest 100 communication logs are printed on the report.