<Security Settings>
Specify the settings for enhancing the machine's security.
<Authentication/Password Settings>

(Settings/Registration)

<Management Settings>

<Security Settings>
Specify the settings for enhancing the effective security of the password and the authentication function.
<Encryption Settings>

(Settings/Registration)

<Management Settings>

<Security Settings>
Specify the settings for enhancing the effective encryption security.
<System Verification Settings>

(Settings/Registration)

<Management Settings>

<Security Settings>
Specify whether to use the system verification and protection functions.
<Verify System at Startup>: Verifies the integrity of the firmware and MEAP applications when the machine starts up.
<McAfee Embedded Control>: Improves system reliability while the machine is running by using the McAfee Embedded Control to prevent unauthorized program modification or execution. This is only available when <Verify System at Startup> is <On>.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<System Verification Settings> | <Verify System at Startup>: <On>, <Off> | No | No | Yes | No | C | Settings/Registration Basic Information |
<McAfee Embedded Control>: <On>, <Off> | No | No | Yes | No | C | Settings/Registration Basic Information |
|
With <Verify System at Startup>, the machine is restarted when you change the setting from <Off>  <On> or when you press <OK> without changing the setting from <On>. To maintain the <On> setting without restarting the machine, press <No> in the confirmation screen, and then press <Cancel> in the <System Verification Settings> screen. |
|
When <Verify System at Startup> is set to <On>Startup takes longer than when it is set to <Off> because system verification is performed. The following events and results are recorded to the device management log. Managing the LogsEvent | Firmware verification, MEAP application verification | Result | Success, Failure |
If an error code appears on the screen when you switch the machine on, contact your dealer or service representative. When <McAfee Embedded Control> is set to <On>The machine takes several minutes to restart after you specify this setting for the first time. |