Paper Output
Finishing
[Off], [Collate], [Group]*, [Rotate+Collate], [Rotate+Group], [Offset+Collate], [Offset+Group], [Staple+Collate], [Staple+Group], [Eco(Stpl-Fr)+Col], [Eco(Stpl-Fr)+Grp]
Copies to Offset (Offset+Collate):
1 to 9999; 1*
Staple Position (Staple+Collate and Staple+Group):
Corner (Upper-L), Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), and Double (Left)
Staple Position (Eco(Stpl-Fr)+Col and Eco(Stpl-Fr)+Grp):
Corner (Upper-L), Corner (Upper-R), Corner (Lower-R), and Corner (Lower-L).
Some of the above options require specific delivery trays and may not be available unless appropriate delivery trays are attached.
: Available - : Unavailable
| Inner Finisher-K Booklet Finisher-AA | No Options Inner 2way Tray-J Copy Tray-J |
Collate | | |
Group | | |
Rotate+Collate | - | |
Rotate+Group | - | |
Offset+Collate | | - |
Offset+Group | | - |
Staple+Collate | | - |
Staple+Group | | - |
Eco(Stpl-Fr)+Col | | - |
Eco(Stpl-Fr)+Grp | | - |
[Off]
This setting prints all copies of the same page before printing the next page.
[Collate]
This setting prints all pages of each copy before printing the next copy.
[Group]
This setting prints all copies of the same page before printing the next page.
[Rotate+Collate]
This setting prints all pages of each copy (collating), and rotates every other complete copy 90 degrees to indicate where each copy starts.
[Rotate+Group]
This setting prints all copies of the same page before printing the next page. It rotates every other complete set of pages to indicate where each new set starts.
[Offset+Collate]
This setting prints all pages of each copy (collating). It offsets every other complete copy by the number specified with this setting to indicate where each copy starts.
[Offset+Group]
This setting prints all copies of the same page before printing the next page. It offsets every other complete set of pages to indicate where each new set starts.
[Staple+Collate]
This setting prints all pages of each copy (collating), and prepares them for stapling according to the option selected for [Staple+Collate].
[Staple+Group]
This setting prints all copies of the same page before printing the next page, and prepares them for stapling according to the option selected for [Staple+Group].
[Eco(Stpl-Fr)+Col]
This setting prints all pages of each copy (collating), and prepares them for binding without staples.
[Eco(Stpl-Fr)+Grp]
This setting prints all copies of the same page before printing the next page, and prepares them for binding without staples.
Examples of each Finishing option when printing three copies of a three page document:
Off | Collate | Group |
| | |
| Rotate+Collate | Rotate+Group |
| | |
| Offset+Collate | Offset+Group |
| | |
| Staple+Collate, Eco(Stpl-Fr)+Col | Staple+Group, Eco(Stpl-Fr)+Grp |
| | |
IMPORTANT |
A large print job may be automatically canceled by the machine. |
NOTE |
[Offset+Collate] and [Offset+Group] are available if you select the following paper size: When the Inner Finisher-K/Booklet Finisher-AA is attached: A3, B4, A4, A4R, B5, 11"x17", LGL, LTR, LTRR, EXEC |
When you select [Staple+Collate], [Staple+Group], [Eco(Stpl-Fr)+Col], or [Eco(Stpl-Fr)+Grp], you can select the stapling position.
[Corner (Upper-L)] | [Double (Top)] | [Corner (Upper-R)] | [Double (Right)] |
| | | |
[Corner (Lower-R)] | [Double (Bottom)] | [Corner (Lower-L)] | [Double (Left)] |
| | | |
NOTE |
When you are stapling paper in landscape orientation, the image orientation and the staple position may not match. |
Inner Finisher-K/Booklet Finisher-AA
: Available -: Unavailable
| Corner (Upper-Left) | Double (Top) | Corner (Upper-Right) | Double (Right) | Corner (Lower-Right) | Double (Bottom) | Corner (Lower-Left) | Double (Left) |
11" x 17" | *2*3 | | *2*3 | - | *2*3 | | *2*3 | - |
LGL | | | | - | | | | - |
LTR | *2*3 | - | *2*3 | | *2*3 | - | *2*3 | |
LTRR | | | *1 | - | | | *1 | - |
EXEC | | - | | | | - | | |
A3 | *2*3 | | *2*3 | - | *2*3 | | *2*3 | - |
B4 | *2 | | *2 | - | *2 | | *2 | - |
A4 | *2*3 | - | *2*3 | | *2*3 | - | *2*3 | |
A4R | | | *1 | - | | | *1 | - |
B5 | *2 | - | *2 | | *2 | - | *2 | |
*1: Will be stapled parallel to the edge of the paper.
*2: You can also set the Eco (Staple-Free) mode. (When the Inner Finisher-K is attached)
*3: You can also set the Eco (Staple-Free) mode. (When the Booklet Finisher-AA is attached)
NOTE |
The maximum number of sheets of plain type paper that can be stapled at one time is: A3, B4, A4R, 11" x 17", LGL, LTRR: 30 sheets A4, B5, LTR, EXEC: 50 sheets The number of sheets of plain paper that can be stapled with the Eco (Staple-Free) mode are 5 sheets. |
Punch
[Punch]: [On], [Off]*
[Punch Position]: [Left]*, [Right], [Top], [Bottom]
[Punch Type]: [Finisher(2 Hole)], [Finisher(3 Hole)]*
This setting enables you to specify the desired paper position for holes to be punched for binding.
NOTE |
This function is available for selection if the puncher unit is attached to the finisher. The available paper sizes for hole punching vary according to the puncher that is attached. (See "User's Guide.") Make sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch. |
Fold
Fold | [On] [Off]* |
Fold Type | [Saddle Fold] |
Saddle Fold Sheet Together | 1* to 3 sheets |
*The number of sheets may vary according to the paper thickness.
*This function is available only if the Booklet Finisher-AA is attached to the machine.
This setting enables you to specify whether to use the fold function on printed sheets.
Fold
[On] | Performs folding. |
[Off] | Does not perform folding. |
Fold Type
[Saddle Fold]
Saddle folds multiple sheets together.
Saddle Fold Sheet Together
This setting enables you to specify the number of sheets to fold together.
NOTE |
The paper sizes that can be folded are: A3, B4, A4R, 11" x 17", LGL, and LTRR. Some types of paper cannot be folded. You can adjust the paper folding position in [Adjust Fold Position] in [Adjustment/Maintenance] (Settings/Registration). For more information, see the "User's Guide." |