<Adjust Action>

Specify the settings for adjusting the machine's actions.
 
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.
Item marked with an asterisk (*)
Only appears if you have the option installed.

<Saddle Stitch Staple Repositioning> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
Feeds papers to the saddle stitcher unit and staples them several times, and performs the saddle stitch staple repositioning procedure. The machine performs this adjustment procedure if stapling has not been performed after you clear a staple jam or replace the staple cartridge.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Saddle Stitch Staple Repositioning>
<Start>
Yes
Yes
No
No
No
-
Make sure to remove all output booklets from the booklet tray before performing the saddle stitch staple repositioning procedure.
C5700 Series Only
When performing saddle stitch staple repositioning, always use plain paper.
Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine.
305 mm x 457 mm, A3, B4, A4R, 11" x 17", LGL, LTRR, or custom paper sizes equivalent to these paper sizes can be used. (Make the paper source to which transparencies are registered unavailable.)

<Change Fold/Stitch Position> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
If you notice that the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error. Adjust the folding position of the paper and the saddle stitch position at the same time. Adjusting the Saddle Stitch Position
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Change Fold/Stitch Position>
-2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments)
Yes
Yes
No
No
No
-

<Adjust Saddle Stitch Fold Position> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the fold placement to compensate for this error. This mode enables you to adjust the folding position without changing the stapling position. Adjusting the Saddle Stitch Folding Position
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Adjust Saddle Stitch Fold Position>
-2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments)
Yes
Yes
No
No
No
-

<Adjust Double Staple Width> (C7700 Series Only) *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can adjust the double staple width.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Adjust Double Staple Width>
<120 mm>, <145 mm>
Yes
Yes
No
No
No
-
When this mode is set to <120 mm>, the productivity of the machine may be slightly reduced.

<Switch Finisher Puncher Mode> (C7700 Series / C5700 Series Only) *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can set whether to give priority to the punching speed or to precision.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Switch Finisher Puncher Mode>
<Speed Priority>, <Precision Priority>
Yes
Yes
No
No
B
Settings/Registration Basic Information

<Adjust Trim Width> (C7700 Series Only) *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can adjust the trim width of saddle stitched printouts in 0.1 mm increments. Adjusting the Trimming Width (C7700 Series Only)
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Adjust Trim Width>
2.0 mm to 20.0 mm
Yes
Yes
No
No
No
-

<Color/B&W Priority for First Print Time> (C7700 Series Only)

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can set whether priority is given to color or black-and-white printing for the first print time.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Color/B&W Priority for First Print Time>
<Color Priority>, <Black & White Priority>
No
No
No
No
B
Settings/Registration Basic Information
The settings is only effective after the first job is processed and you have restarted the machine (by turning the main power switch OFF and then ON again). For instructions on restarting (turning the main power switch OFF and then ON) the machine, see Turning ON the Machine.

<Adjust Fold Position> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can adjust the paper folding position. Adjusting the Saddle Stitch Folding Position
C7700 Series(without paper folding unit) / C5700 Series / C3700 Series only
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Adjust Fold Position>
-2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments)
Yes
Yes
No
No
No
-
 
C7700 Series(with paper folding unit) only
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Adjust Fold Position>
<Adjust Z-Fold Position>
-2.0 mm to 0.0 mm to +1.5 mm (in 0.5 mm increments)
Yes
Yes
No
No
No
-
<Adjust C-Fold Position>
When the Paper Folding Unit-J is attached:
-7.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments)
When the Document Insertion / Folding Unit-K is attached:
<A>:
0.0 mm to 6.0 mm (in 0.5 mm increments)
<B>:
0.0 mm to 3.0 mm (in 0.5 mm increments)
Yes
Yes
No
No
No
-
<Adjust Accordion Z-Fold Position>
-7.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments)
Yes
Yes
No
No
No
-
<Adjust Double Parallel Fold Position>
<A>:
-2.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments)
<B>:
0.0 mm to 1.0 mm to +5.0 mm (in 0.5 mm increments)
Yes
Yes
No
No
No
-
<Adjust Half Fold Position>
-2.0 mm to 0.0 mm to +2.0 mm (in 0.5 mm increments)
Yes
Yes
No
No
No
-
<Adjust Saddle Fold Position>
-2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments)
Yes
Yes
No
No
No
-

<Correct Curl for Each Paper Drawer> (C7700 Series Only) *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
This mode enables you to adjust the curl correction level of each paper source.
The curl correction level is constantly adjusted to suit the characteristics of the paper. However, if the paper curl is not corrected properly, you can manually adjust the curl correction level to accommodate the environment and the characteristics of the paper, such as moisture in the paper. Curl Correction for Each Paper Drawer (C7700 Series Only)
 
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Correct Curl for Each Paper Drawer>
Face Up Output (Reverse):-10 to 0 to +10
Face Down Output (Normal):-10 to 0 to +10
Yes
Yes
No
No
No
-

<Time Until Stapling Starts in Stapler Mode> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
You can set the time until stapling is performed after inserting paper when using manual stapling.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Time Until Stapling Starts in Stapler Mode>
1 to 3 to 5 second
Yes
Yes
No
No
C
Settings/Registration Basic Information

<Start Key Touch Recognition Delay>

 (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Action>
Adjust the touch time required to begin startup processing.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Start Key Touch Recognition Delay>
-1 to 0 to +7
No
No
No
No
C
Settings/Registration Basic Information
This setting does not appear on models with an upright control panel.
78RL-0LS