Files can be printed simply by copying them to a hot folder created in the shared folder of the Advanced Box. Print settings do not need to be specified from the printer driver because they can be specified for each folder. |
When using a hot folder, it is necessary to change the following Advanced Box settings in advance. For details, see Setting Advanced Box to Public. <Advanced Box> <Open to Public> <By SMB> or <By WebDAV> <Advanced Box> <Prohibit Writing from External> <Off> |
Multiple folders with the same folder name cannot be registered. A folder with the same name as an existing folder in the shared folder cannot be registered. A maximum of 20 hot folders can be registered. |
Hot folders are generated directly below the shared folder of the Advanced Box. The specifications of added folders are the same as the Advanced Box. For details on the specifications of the Advanced Box, see Storage Space Functions. The generated hot folder can be renamed and deleted from the Advanced Box. It still functions as a hot folder after being renamed. This setting can only be specified by a user with Administrator privileges. This setting can be imported/exported with models that support batch importing of this setting. When performing batch exporting, this setting is included in [Settings/Registration Basic Information]. Hot folders may not operate correctly when the Advanced Box is backed up or restored. When the Advanced Box is backed up or restored, check the settings on the [Hot Folder Management] screen and change them as required. |
Files stored in the hot folder are deleted after printing. When storing files in a folder, store a copy rather than the original files. |
When using an IPv6 address, enter the IP address enclosed in square brackets ([ ]). |
When using an IPv6 address, enter the IP address enclosed in square brackets ([ ]). When TLS is enabled, enter "https" instead of "http" when entering the address. |
Files in the PDF, TIFF, or JPEG format can be printed with a hot folder. Files cannot be printed when the following security settings are enabled. Remote UI [Hot Folder Management] will also no longer appear. [Use ACCESS MANAGEMENT SYSTEM] <Restrict Job from Remote Device without User Auth.> |