Setting the Fogging Prevention Mode

If you are using the machine in a low humidity environment, toner may be applied lightly to an area where supposed to be unprinted (white area). This problem may be solved if you set <Fogging Prevention Mode> to <On>.
1
Press  (Settings/Registration)  <Adjustment/Maintenance>  <Adjust Image Quality>  <Special Processing>  <Fogging Prevention Mode>.
2
Select the mode, and press <OK>.
Set <Mode 1> or <Mode 2>. If <Mode 1> is set, the correction effects becomes weaker, and it becomes stronger if <Mode 2> is set. However, the toner density on the output may become lighter when <Mode 2> is set.
85KR-0RX