<Adjust Action>
Specify the settings for adjusting the machine's actions.
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
<Saddle Stitch Staple Repositioning> *
(Settings/Registration) 
<Adjustment/Maintenance> <Adjust Action>Feeds papers to the saddle stitcher unit and staples them several times, and performs the saddle stitch staple repositioning procedure. The machine performs this adjustment procedure if stapling has not been performed after you clear a staple jam or replace the staple cartridge.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Saddle Stitch Staple Repositioning> | <Start> | Yes | Yes | No | No | No | - |
 |
Paper that is required for the saddle stitch staple repositioning procedure is automatically fed to the saddle stitcher unit by the machine. 305 mm x 457 mm, A3, B4, A4R, 11" x 17", LGL, LTRR, or custom paper sizes equivalent to these paper sizes can be used. (Make the paper source to which transparencies are registered unavailable.) |
<Change Fold/Stitch Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the saddle stitch position of the paper is not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error. Adjust the folding position of the paper and the saddle stitch position at the same time. Adjusting the Saddle Stitch Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Change Fold/Stitch Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Stitch Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>If you notice that the folds of the paper are not exactly in the middle of the booklet, you can make adjustments to the fold placement to compensate for this error. This mode enables you to adjust the folding position without changing the stapling position. Adjusting the Saddle Stitch Folding Position
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Saddle Stitch Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Double Staple Width> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the double staple width.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Double Staple Width> | When the Staple Finisher-X / Booklet Finisher-X is attached: <120 mm>, <145 mm> When the Staple Finisher-W PRO / Booklet Finisher-W PRO is attached: 120 mm to 150 mm (in 1 mm increments) | Yes | Yes | No | No | No | - |
|
When the paper width is smaller than 257 mm, double staple width is fixed <120 mm>. When the Staple Finisher-W PRO or Booklet Finisher-W PRO is attached: valid only when the Offset mode is not set. The mode is set to <120 mm> when used with the Offset mode. When the Staple Finisher-X or Booklet Finisher-X is attached: the productivity of the machine may be slightly reduced if this mode is set to <120 mm>. |
<Switch Finisher Puncher Mode> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether to give priority to the punching speed or to precision.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Switch Finisher Puncher Mode> | <Speed Priority>, <Precision Priority> | Yes | Yes | No | No | B | - |
<Speed/Precision Priority for Double Staple> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set whether to give priority to the double stapling speed or to precision.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Speed/Precision Priority for Double Staple> | <Speed Priority>, <Precision Priority> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
 |
This mode is enabled only when using the following paper: Paper size: The width for the feeding direction is 215.9 mm or less Paper type: Plain, Heavy 1, Color, Pre-punched Paper weight: 64 g/m2 to 128 g/m2 If you select <Speed Priority>, stapled output paper may not be aligned due to the temperature, humidity, or characteristics of the paper type. |
<Adjust Trim Width> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the trim width of saddle stitched printouts in 0.1 mm increments. Adjusting the Trimming Width (8700 Series Only)
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Trim Width> | When the Inner Booklet Trimmer-A is attached to the Booklet Finisher-X: 2.0 mm to 20.0 mm (in 0.1 mm increments) When the Booklet Trimmer-F is attached to the Booklet Finisher-W PRO: 2.0 mm to 28.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Fold Position> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust the paper folding position. Adjusting the Paper Folding Position
8700 Series (without paper folding unit) / 6700 Series (without paper folding unit) / 6000 Series / 4700 Series only
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Fold Position> | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
8700 Series (with paper folding unit) / 6700 Series (with paper folding unit) only
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Adjust Fold Position> | |||||||
<Adjust Z-Fold Position> | -2.0 mm to 0.0 mm to +1.5 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust C-Fold Position> (8700 Series Only) | -7.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust C-Fold Position> (6700 Series Only) | <A>: 0.0 mm to 6.0 mm (in 0.5 mm increments) <B>: 0.0 mm to 6.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Accordion Z-Fold Position> (8700 Series Only) | -7.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Double Parallel Fold Position> (8700 Series Only) | <A>: -2.0 mm to -1.0 mm to +5.0 mm (in 0.5 mm increments) <B>: 0.0 mm to 1.0 mm to +5.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Half Fold Position> (8700 Series Only) | -2.0 mm to 0.0 mm to +2.0 mm (in 0.5 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Fold Position> (8700 Series Only) | When the Booklet Finisher-W PRO is attached: -8.50 mm to 0.00 mm to +8.50 mm (in 0.25 mm increments) When the Booklet Finisher-X is attached: -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) When the Booklet Finisher-AC is attached: -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Adjust Saddle Fold Position> (6700 Series Only) | -2.00 mm to 0.00 mm to +2.00 mm (in 0.25 mm increments) | Yes | Yes | No | No | No | - |
<Alignment Adjustment When Stapling> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>The copied or printed paper may shrink because of temperature, humidity, or a characteristic of the paper type. In this case, this mode enables you to align copied or printed papers by adjusting the position of the alignment guide inside the finisher so as to staple the aligned papers.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Alignment Adjustment When Stapling> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
|
If the alignment guide's position is too close to the paper, a paper jam or paper crease may occur. Make sure to perform fine adjustment of the alignment guide's position. |
<Finisher Tray A Alignment Adjustment> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust paper alignment when outputting to Tray A of a finisher. Adjusting Paper Alignment (8700 Series Only)
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Tray A Alignment Adjustment> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
|
You cannot align output paper in the following situations: when using paper smaller than A5R when using different size paper together If you set <Align Output Paper of Diff. Sizes (Diff. Widths)>to <On>, you can align output paper by paper width. |
|
You can switch between positive and negative values by pressing <±>. |
<Finisher Tray B Alignment Adjustment> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can adjust paper alignment when outputting to Tray B of a finisher. Adjusting Paper Alignment (8700 Series Only)
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Tray B Alignment Adjustment> | -3.0 mm to 0.0 mm to +3.0 mm (in 0.1 mm increments) | Yes | Yes | No | No | A | Settings/Registration Basic Information |
|
You cannot align output paper in the following situations: when using paper smaller than A5R when using different size paper together If you set <Align Output Paper of Diff. Sizes (Diff. Widths)>to <On>, you can align output paper by paper width. |
|
You can switch between positive and negative values by pressing <±>. |
<Finisher Output Priority Settings (Heavy 5, 6)> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can give priority to productivity or alignment for the output paper when using <Heavy 5> or <Heavy 6>.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Output Priority Settings (Heavy 5, 6)> | <Productivity Priority>, <Alignment Priority> | Yes | Yes | No | No | No | - |
<Finisher Output Priority Settings (Thin)> (8700 Series Only) *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can give priority to productivity or alignment for the output paper when using thin paper.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finisher Output Priority Settings (Thin)> | <Productivity Priority>, <Alignment Priority> | Yes | Yes | No | No | No | - |
|
<Alignment Priority> is available only when outputting on Tray B of a finisher. |
<Time Until Stapling Starts in Stapler Mode> *
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>You can set the time until stapling is performed after inserting paper when using manual stapling.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Time Until Stapling Starts in Stapler Mode> | 1 to 3 to 5 second | Yes | Yes | No | No | C | Settings/Registration Basic Information |
<Start Key Touch Recognition Delay>
(Settings/Registration) <Adjustment/Maintenance> <Adjust Action>Adjust the touch time required to begin startup processing.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Start Key Touch Recognition Delay> | -1 to 0 to +7 | No | No | No | No | C | Settings/Registration Basic Information |
|
This setting does not appear on models with an upright control panel. |