<Display Settings>
All the settings related to viewing of the display are listed with descriptions. Default settings are marked with a dagger (
).
). |
Asterisks (*)Settings marked with "*1" cannot be imported or exported. Settings marked with "*2" may be unavailable or vary or have different defaults depending on your country or region. |
<Default Screen After Startup/Restoration> 
By default, the Home screen is displayed immediately after the machine is turned ON or when the Auto Reset function is performed. Specify the setting to change the default screen and display the main screen of a different function.
<Home> <Secure Print> <Status Monitor> |
<Menu> 
<Preferences> <Display Settings> <Default Screen After Startup/Restoration> Select a function to display the desired screen 
<Preferences> <Display Settings> <Default Screen After Startup/Restoration> Select a function to display the desired screen <Home Screen Button Display Settings> *1
Configure the settings for the buttons displayed in the Home screen. Customizing the Home Screen
<Language> *2
Select the display language used for the display, reports, and lists.
<Deutsch> <English> <Español> <Français> <Italiano> <Português> <日本語> <中文(繁體)> <中文(简体)> <한국어> |
<Menu> <Preferences> <Display Settings> <Language> Select a language <Yes>
<Preferences> <Display Settings> <Language> Select a language <Yes> <Remote UI Language> *2
Select the display language used for the Remote UI screens.
<English> <Japanese> <French> <Spanish> <German> <Italian> <Portuguese> <Chinese (Simplified)> <Chinese (Traditional)> <Korean> |
<Menu> <Preferences> <Display Settings> <Remote UI Language> Select a language
<Preferences> <Display Settings> <Remote UI Language> Select a language <Millimeter/Inch Entry Switch> *2
Select the unit of measurement.
<Millimeter> <Inch> |
<Menu> <Preferences> <Display Settings> <Millimeter/Inch Entry Switch> Select <Millimeter> or <Inch>
<Preferences> <Display Settings> <Millimeter/Inch Entry Switch> Select <Millimeter> or <Inch> <Gram/Pound Switch> *2
Select the unit of measurement for the basis weight. This setting is available when <Select Country/Region> is set to <United States (US)>.
<Gram> <Pound> |
<Menu> <Preferences> <Display Settings> <Gram/Pound Switch> Select <Gram> or <Pound>
<Preferences> <Display Settings> <Gram/Pound Switch> Select <Gram> or <Pound> <Display Timing for Cart. Prep.>
Set the display timing for the message notifying you that the amount remaining in the toner cartridges is low.
<Auto> <Off> <Custom> <On> |
<Menu> <Preferences> <Display Settings> <Display Timing for Cart. Prep.> Select <Off> in <Auto> Enter toner level in <Custom> <Apply>
<Preferences> <Display Settings> <Display Timing for Cart. Prep.> Select <Off> in <Auto> Enter toner level in <Custom> <Apply> <Show Warnings>
Specify whether to display a message telling that the amount remaining in the toner cartridges is low.
<Off> <On> |
<Menu> <Preferences> <Display Settings> <Show Warnings> Select <Off> or <On> <Apply>
<Preferences> <Display Settings> <Show Warnings> Select <Off> or <On> <Apply> |
When <Action When Warning> is set to <Stop Printing>, you cannot set this item to <Off>. When <Continue Print. When Cart. Low> is set to <Off>, the message will appear even if you set this item to <Off>. <Continue Print. When Cart. Low> |
<Action When Warning>
Specify whether to continue printing when the amount remaining in the toner cartridges is low.
<Low Cartridge Level> <Continue Printing> <Stop Printing> |
<Menu> <Preferences> <Display Settings> <Action When Warning> <Low Cartridge Level> Select <Continue Printing> or <Stop Printing> <Apply> <Yes>
<Preferences> <Display Settings> <Action When Warning> <Low Cartridge Level> Select <Continue Printing> or <Stop Printing> <Apply> <Yes> |
If you change the setting of this item from <Continue Printing> to <Stop Printing>, <Show Warnings> is set to <On>. |
<Display IP Address>
Specify whether to display the machine's IPv4 address on the <Status Monitor> screen. <Status Monitor> Screen
<Off> <On> |
<Menu> <Preferences> <Display Settings> <Display IP Address> Select <Off> or <On>
<Preferences> <Display Settings> <Display IP Address> Select <Off> or <On>