<Paper Output Settings>

Specify the Paper Output Settings that are common to all the functions.
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.
Item marked with an asterisk (*)
Only appears if you have the option installed.

<Output Tray Settings> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
You can set the tray to output to for each function. Specifying the Output Tray for Printed Paper
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Output Tray Settings>
<Tray A>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2>
<Tray B>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2>
<Tray C>: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2>
<Tray D>*1: <Copy>, <Access Stored Files>, <Printer>, <Receive>, <Other>, <IP Fax 1>, <Fax 1>, <Fax 2>
Yes
Yes
Yes
No
A
Settings/Registration Basic Information
*1 May not appear on some models.

<Use Optional Output Tray> (C3800 Series Only) *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
Specify whether to use the tray of the optional equipment as the output tray.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Use Optional Output Tray>
<Output Tray 1>: <On>, <Off>
<Output Tray 2>: <On>, <Off>
Yes
No
No
No
A
Settings/Registration Basic Information
The output trays which can be used vary depending on the optional equipment attached, such as the finisher. For more information, see Optional Equipment.

<Offset Jobs> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to shift the output for each job when multiple jobs are printed consecutively.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Offset Jobs>
<On>, <Off>
Yes
Yes
Yes
Yes
C
Settings/Registration Basic Information

<Job Separator Between Jobs>

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to insert the specified paper at the start of each job when multiple jobs are printed consecutively.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Job Separator Between Jobs>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<Change> (Select Paper Source)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information

<Job Separator Between Copies>

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
This enables you to insert the specified paper each number of copy sets to divide the sets. If you set this, paper is inserted when printing with Collate (Page Order), Offset, or Staple.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Job Separator Between Copies>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<Copies> (1 to 10 to 9999)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
<Change> (Select Paper Source)
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
You cannot insert job separation sheets between copy sets in the following cases. Note that the available functions and papers differ depending on your model and the installed options.
If you are using the Group, Booklet, Saddle Stitch, or Fold mode.
If you are using tab paper.

<Unprocessed Tab Paper Forced Output> (C5800 Series Only)

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
You can set whether to force to output excess tab paper that was not used.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Unprocessed Tab Paper Forced Output>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
If <Unprocessed Tab Paper Forced Output> is set to <On>, the extra amount of tab paper sheets that were not required for the job are forced out of the machine.
Example: If the number of tabs is set to <5> and the machine estimates that seven sheets of tab paper are needed for the print job, you must prepare two sets of tab paper each containing five tabs (10 total). Therefore, if the machine only uses seven tab paper sheets, three tab paper sheets will remain.

<Action When Too Many Sheets to Staple> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
You can specify the procedure to perform when there are too many sheets to staple.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Action When Too Many Sheets to Staple>
<Corner/Double>: <Print without Stapling>, <Cancel Printing>
<Saddle Stitch>: <Print without Stapling>, <Cancel Printing>
<Eco (Staple-Free)>: <Print without Stapling>, <Cancel Printing>
Yes
Yes
No
No
B
Settings/Registration Basic Information
For information on printing using stapling, see Finishing with the Stapler.

<Enable Offset for Single-Sheet Print Jobs> *

 (Settings/Registration)  <Function Settings>  <Common>  <Paper Output Settings>
Specifying <On> in this setting allows you to output single-page print jobs with the sheet offset in the following situations:
Shift is specified when job is received
Printing of multiple copies is specified when job is received
 
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Enable Offset for Single-Sheet Print Jobs>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
This setting is disabled for copy jobs.
98YC-0RF