Staple Jams in the Booklet Finisher-AB/Paper Folding/Booklet Finisher-A
|
Confirm before handlingIf there is any paper in the booklet tray, remove it. |
Clearing Staple Jams in the Staple Unit
1
Open the front cover of the finisher.
2
Pull out the staple cartridge.
Hold the green tab on the staple cartridge and pull it straight out.
3
Remove any jammed staples from the staple cartridge.
 | Lift up the knob on the staple cartridge.  |
 | Remove all jammed staples and exposed staples.  |
 | Return the knob on the staple cartridge to its original position. |
4
Hold the green tab on the staple cartridge and push it in as far as it will go.
5
Close the front cover of the finisher.
The finisher may automatically perform dry stapling to perform staple repositioning.
Clearing Staple Jams in the Saddle Stitcher Unit
1
Open the front cover of the finisher.
2
Pull out the saddle stitcher unit.
3
Remove the (two) staple cartridges while pulling down the lever towards yourself.
4
Remove any jammed staples from the staple cartridge.
| Lower the knob on the staple cartridge.  |
| Remove all jammed staples and exposed staples.  |
| Return the knob on the staple cartridge to its original position. |
5
Install the (two) staple cartridges to the saddle stitcher unit.
6
Gently return the saddle stitcher unit to its original position.
7
Close the front cover of the finisher.
After clearing a staple jam, make sure to adjust the staple position. <Saddle Stitch Staple Repositioning>