Front Side
imageRUNNER ADVANCE DX C568iF/C478iF | imageRUNNER ADVANCE DX C568iFZ/C478iFZ | |
 |  |
Control panel
The control panel consists the indicators and the touch panel display. You can perform all the operations and specify settings from the control panel.
Feeder
Automatically feeds originals into the machine for scanning. When two or more sheets are loaded in the feeder, originals can be scanned continuously. Feeder
USB port (Front-right side of the machine)
You can connect devices such as a USB memory device to the machine. Connecting a USB Memory Device
The machine can supply a maximum power of 5 V 500 mA. Connecting a device that requires more power may damage the machine.
Some types of memory media may not be able to save data correctly.
The USB port (front-right side of the machine) supports USB 2.0.
Power switch
Press the power switch when turning ON or OFF the machine.
Right cover of the main unit
Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source
Multi-purpose tray
Load paper into the multi-purpose tray when you want to use a type of paper different from that which is loaded in the paper drawer.
Front cover of the main unit
Open this cover when replacing the toner cartridge or the waste toner container.
Right cover of the paper drawer
Open this cover when clearing a paper jam inside the machine. Paper Jams in a Paper Source
Paper drawer 1
Load the type of paper that you frequently use. Paper Drawer
Left cover of the main unit
Open this cover when replacing the the waste toner container. Replacing the Waste Toner Container
Glass cleaning sheet storage box
Use this box to store the cloth for cleaning the platen glass.
Motion sensor
When the motion sensor detects a person near the machine, the machine exits sleep mode automatically. Entering Sleep Mode
Finisher
When paper is output, you can use some finishing functions. Finisher (imageRUNNER ADVANCE DX C568iFZ/C478iFZ)
Output tray (Tray A)
Paper is output here when printing finishes. When you use imageRUNNER ADVANCE DX C568iFZ/C478iFZ, you can specify functions for which the tray is used, by configuring <Output Tray Settings>. <Output Tray Settings> *
|
For more information about the configuration of optional equipment installed on the machine, see Options. |
Connecting a USB Memory Device
You can connect a USB memory device to the USB ports located on the right side of the machine, and directly print data from the USB memory device. Originals scanned using the machine can also be saved directly to the USB memory device. Working with Data in Memory Media
 |
Make sure that the USB memory device is oriented properly when connecting it to the machine. If it is not connected properly, it may cause the USB memory device or machine to malfunction. Make sure to follow the proper procedure when removing the USB memory device. Removing the memory media Failure to do so may cause the USB memory device or machine to malfunction. You can use a USB memory device with a FAT32 (up to 32 GB) or exFAT (up to 2 TB) file system. |
 |
Unsupported devices and usagesMemory media with security functions Memory media that does not meet the USB specification Memory card readers connected via USB Connecting memory media via an extension cable Connecting memory media via a USB hub |