<Scan Settings>

Specify the Scan Settings that are common to all the functions.
 
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.

<Timing to Raise Feeder Tray>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can select the timing for raising the feeder tray when scanning originals using functions such as Scan and Store, and Copy.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Timing to Raise Feeder Tray>
<When Start Is Pressed>, <When Original Is Placed>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information
For C3800 Series
This item only appears if the 2-Sided Single Pass Feeder is installed.

<Feeder Jam Recovery Method>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can select whether scanning will start again from the first page of the original or the page of the original in which scanning was interrupted if a paper jam occurs in the feeder.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Feeder Jam Recovery Method>
<From 1st Page>, <From Suspnd. Original>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information
Direct sending of faxes does not support this setting. If a paper jam occurs while performing direct sending, the job will be canceled. In this case, set the job again.
Depending on the location of a paper jam, it can be difficult to determine whether document scanning has been completed. If you have set <From Suspnd. Original> for <Feeder Jam Recovery Method> and you do not find until which page the document has been scanned, it is recommended that you cancel the job, and then execute it again.
Select one of the following.
<From 1st Page>: Place the originals in the feeder again, and then restart scanning from the first page of the document. The originals will be fed automatically until the page of the document in which scanning is interrupted.
<From Suspended Original>: Place the originals that were not scanned because of a paper jam in the feeder, and then start scanning all the remaining originals again.

<Set Detection of Feeder Multi. Sheet Feed as Default>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can specify the default setting of <Detect Feeder Multi Sheet Fd.> for each function. Basic Copy Operations Basic Operations for Scanning Originals Sending I-Faxes Basic Operations for Sending Faxes
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Set Detection of Feeder Multi. Sheet Feed as Default>
<On>, <Off>
Yes
Yes
Yes
No
C
Settings/Registration Basic Information
For C3800 Series
This item only appears if the 2-Sided Single Pass Feeder is installed.

<Scanner Noise Settings>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set whether priority is given to scanning speed or to noise reduction when the original is scanned from the feeder.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Scanner Noise Settings>
<Speed Priority>, <Quiet>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information

<Streak Prevention>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set whether to detect and prevent streaks when scanning originals.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Streak Prevention>
<On>, <Off>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information
When <On> is selected, extremely thin lines may be detected as streaks.

<Speed/Image Quality Priority for B&W Scan>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set whether priority is given to scanning speed or to image quality when performing black and white scanning.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Speed/Image Quality Priority for B&W Scan>
<Fax/I-Fax Send Jobs>: <Speed Priority>, <Quality Priority>
<All Send Jobs Except Fax/I-Fax Jobs>: <Speed Priority>, <Quality Priority>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information

<LTRR/STMT Original Selection>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can forcibly designate the way the machine handles LTRR and STMT originals that are placed on the platen glass.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<LTRR/STMT Original Selection>
<Select Manually>, <Use LTRR Format>, <Use STMT Format>
Yes
Yes
Yes
Yes
B
Settings/Registration Basic Information

<Remote Scan Gamma Value>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set the gamma value to use when scanning color documents into your computer through the Network Scan function. Select the gamma value most suited to your computer settings so that you can print the document with the optimal density.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Remote Scan Gamma Value>
<Gamma 1.0>, <Gamma 1.4>, <Gamma 1.8>, <Gamma 2.2>
Yes
Yes
Yes
Yes
B
Settings/Registration Basic Information

<Auto Online>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
Set this to <On> to automatically enable the remote scanner function when you press <Scanner> (<Home> Screen).
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Auto Online>
<On>, <Off>
Yes
No
No
Yes
C
Settings/Registration Basic Information
When the remote scanner function is enabled, you cannot use <Copy> and <Scan and Store>.
You can specify the time period in which you are logged out and the touch panel display returns to the default setting automatically.

<Auto Offline>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
If the machine is connected to a network that is online, scanning is not possible with <Copy> or <Scan and Store>. If you set <Auto Offline> to <On>, the machine automatically goes offline when the time set in <Auto Reset Time> in <Preferences> (Settings/Registration) has elapsed.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Auto Offline>
<On>, <Off>
Yes
No
No
Yes
C
Settings/Registration Basic Information
If <Auto Reset Time> is set to <0>, the machine automatically goes offline after approximately two minutes.
You can specify the time period in which you are logged out and the touch panel display returns to the default setting automatically.

<Auto Set Different Size Originals When Using Feeder>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set whether to automatically use the Different Size Originals mode when scanning with the feeder.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Auto Set Different Size Originals When Using Feeder>
<Scan and Store (Mail Box)/Copy>: <On>, <Off>
<Scan and Store (Excluding Mail Box)/Send>: <On>, <Off>
<Fax>: <On>, <Off>
Yes
Yes
Yes
No
A
Settings/Registration Basic Information
You cannot combine all of the following modes at the same time.
<Different Size Originals>
<Shift>
<Select Paper>:<Auto>
The N on 1, Booklet, Perfect Binding, and Repeat Images modes are processed with the paper size detected by the feeder for the first page.

<Original Thickness Defaults for Scan from Feeder>

 (Settings/Registration)  <Function Settings>  <Common>  <Scan Settings>
You can set to use one of two modes when scanning with the feeder: using a fixed paper weight or enabling the user to specify the paper weight each time.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Original Thickness Defaults for Scan from Feeder>
<Fixed>(<Thin (63 g/m2 or less)>, <Normal>, <Thick (158 g/m2 or more)>), <Always Specify>
Yes
Yes
Yes
No
B
Settings/Registration Basic Information
For C3800 Series
This item only appears if the 2-Sided Single Pass Feeder is installed.
85E3-0R6