Inner Finisher-L, Staple Finisher-AE, Booklet Finisher-AE | No Options, Inner 2way Tray-M, Copy Tray-T | |
Collate | ||
Group | ||
Rotate+Collate | - | |
Rotate+Group | - | |
Offset+Collate | - | |
Offset+Group | - | |
Staple+Collate | - | |
Staple+Group | - | |
Eco(Stpl-Fr)+Col | - | |
Eco(Stpl-Fr)+Grp | - |
Off | Collate | Group |
Rotate+Collate | Rotate+Group | |
Offset+Collate | Offset+Group | |
Staple+Collate, Eco(Stpl-Fr)+Col | Staple+Group, Eco(Stpl-Fr)+Grp | |
IMPORTANT |
A large print job may be automatically canceled by the machine. |
NOTE |
[Offset+Collate] and [Offset+Group] are available if you select the following paper size: When the Inner Finisher-L, Staple Finisher-AE, or the Booklet Finisher-AE is attached: A3, B4, A4, A4R, B5, 11"x17", LGL, LTR, LTRR, EXEC |
[Corner (Upper-L)] | [Double (Top)] | [Corner (Upper-R)] | [Double (Right)] |
[Corner (Lower-R)] | [Double (Bottom)] | [Corner (Lower-L)] | [Double (Left)] |
NOTE |
When you are stapling paper in landscape orientation, the image orientation and the staple position may not match. |
Corner (Upper-Left) | Double (Top) | Corner (Upper-Right) | Double (Right) | Corner (Lower-Right) | Double (Bottom) | Corner (Lower-Left) | Double (Left) | |
11" x 17" | *2*3 | *2*3 | - | *2*3 | *2*3 | - | ||
LGL | - | - | ||||||
LTR | *2*3 | - | *2*3 | *2*3 | - | *2*3 | ||
LTRR | *1 | - | *1 | - | ||||
EXEC | - | - | ||||||
A3 | *2*3 | *2*3 | - | *2*3 | *2*3 | - | ||
B4 | *2 | *2 | - | *2 | *2 | - | ||
A4 | *2*3 | - | *2*3 | *2*3 | - | *2*3 | ||
A4R | *1 | - | *1 | - | ||||
B5 | *2 | - | *2 | *2 | - | *2 |
NOTE |
The maximum number of sheets of plain type paper that can be stapled at one time is: A3, B4, 11" x 17", LGL: 30 sheets A4R, LTRR: 40 sheets A4, B5, LTR, EXEC: 50 sheets The number of sheets of plain paper that can be stapled with the Eco (Staple-Free) mode are 10 sheets. |
NOTE |
This function is available for selection, as shown below. The 2/4 Hole Puncher Unit-A/2/3 Hole Puncher Unit-A is attached to the Staple Finisher-AE or Booklet Finisher-AE. The Inner 2/4 Hole Puncher-D/Inner 2/3 Hole Puncher-D is attached to the Inner Finisher-L. The following paper sizes can be hole punched: When the 2/4 Hole Puncher Unit-A is attached Two holes:A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC Four holes:A3, A4, 11" x 17", LTR, EXEC When the 2/3 Hole Puncher Unit-A is attached Two holes:A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC Three holes:A3, B4, A4, B5, 11" x 17", LTR, EXEC When the Inner 2/4 Hole Puncher-D is attached Two holes:A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC Four holes:A3, A4, 11" x 17", LTR, EXEC When the Inner 2/3 Hole Puncher-D is attached Two holes:A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", LGL, LTR, LTRR, EXEC Three holes:A3, B4, A4, B5, 11" x 17", LTR, EXEC Make sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch. |
Fold | [On] [Off]* |
Fold Type | Saddle Fold* |
Saddle Fold Sheet Together | 1* to 3 at a time |
[On] | Performs folding. |
[Off] | Does not perform folding. |
[Saddle Fold] | Saddle folds multiple sheets together. |
NOTE |
The paper sizes that can be folded are: A3, B4, A4R, 11" x 17", LGL, LTRR, and 12" x 18". Some types of paper cannot be folded. You can adjust the paper folding position in [Adjust Fold Position] in [Adjustment/Maintenance] (Settings/Registration). For more information, see the "User's Guide." |