Replacing the Waste Toner Container
When the waste toner container is almost full or completely full, a message is displayed prompting you to prepare a new waste toner container or perform waste toner container replacement. Prepare a new waste toner container or perform waste toner container replacement according to the displayed message.
|
The waste toner container is a container for collecting unused toner that remains when printing. For information on the model number of the waste toner container, see Replacement Parts. You can check the current amount of space remaining in the waste toner container. |
When a Message Is Displayed
When <Waste toner contnr is nearly full. Rplct not yet needed.> is displayed
The waste toner container is almost full. You can continue printing for a while, but you should have a new one available so that you can make replacement as soon as it is needed. Procedure for Replacing the Waste Toner Container
When <Replace the waste toner container.> is displayed
The waste toner container is full, so printing is not possible any longer. Follow the instructions on the screen to replace the waste toner container. Procedure for Replacing the Waste Toner Container
Procedure for Replacing the Waste Toner Container
When replacing the waste toner container, the procedure is also displayed on the screen. Check the information displayed on the screen in addition to the following procedure.
1
Open the waste toner container cover.
Hold the left edge of the cover when opening it.
2
Pull out the waste toner container.
After pulling out the waste toner container half way, hold the handle on the top and pull it out all the way.
Do not tilt the waste toner container. Doing so may cause the toner in the container to spill.
3
Remove the new waste toner container from its box.
4
Place the waste toner container you removed into a box.
Use the bag included in the box for the new waste toner container. Tightly twist the opening of the bag so that the toner does not spill out, and then place the bag in the box.
5
Install the new waste toner container.
Insert the waste toner container with the Canon logo on top of the container towards the back of the machine, and push it in to load it.
Push the waste toner container in as far as it will go. If the waste toner container is not installed correctly, the container shutter may stay open when the waste toner container is removed, which may cause toner to scatter.
6
Close the waste toner container cover.
 |
Used toner cannot be reused. Do not mix new and used toner together. The used waste toner container will be collected by your dealer or service representative. |