Viewing Network Settings
|
The IP address is not correctly configured if it is displayed as "0.0.0.0". Connecting the machine to a switching hub or bridge may result in a connection failure even when the IP address is correctly configured. This problem can be solved by setting a certain interval before the machine starts communicating. Setting a Wait Time for Connecting to a Network You can print a list of the current network settings. User Data List/System Manager Data List |
Viewing IPv4 Settings
<Status Monitor> 
<Network Information> <IPv4> Select the setting to view Check the settings
<Network Information> <IPv4> Select the setting to view Check the settingsViewing IPv6 Settings
<Status Monitor> <Network Information> <IPv6> Select the setting to view Check the settings
<Network Information> <IPv6> Select the setting to view Check the settingsViewing the MAC Address for Wired LAN
1
Select <Menu> in the Home screen. Home Screen
2
Select <Preferences> <Network>.
<Network>.If the login screen appears, enter the correct ID and PIN. Logging in to the Machine
3
Select <Ethernet Driver Settings>.
The MAC address is displayed.
Viewing the MAC Address and Information for Wireless LAN
1
Select <Wireless LAN Settings> in the Home screen. Home Screen
When a message appears on the display of the machine, select <Yes>.
If a message is displayed telling that no access point can be found, select <Close>.
2
Select <Connection Set.>.
3
Select <Connection Information>.
4
Select the setting to view.
Viewing security information
To view WEP and WPA/WPA2-PSK information, select <Security Settings>.
Viewing from the <Status Monitor> screen
<Wireless LAN Status> and <Latest Error Information> can be viewed from <Status Monitor>.
<Status Monitor> <Network Information> <Network Connection Type> Select the setting to view
<Network Information> <Network Connection Type> Select the setting to view