A warning message appears in the display when the amount remaining in the toner cartridge is low or when printing is no longer possible because of toner depletion. Note that the print quality may suffer if you continue printing without resolving this issue. You can check the amount remaining in the toner cartridges on the display (Checking the Remaining Amount of Consumables).
The message that is displayed depends on the amount remaining in the toner cartridges. Depending on which message is displayed, you will need to make sure that you have a replacement toner cartridge ready or replace the toner cartridge. Procedure for Replacing the Toner Cartridge Consumables
Where "XXXX" appears in the descriptions below, the toner cartridge color black, yellow, magenta, or cyan appears in the actual messages.
<Prepare the XXXX cartridge.>
This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print a large job.
When a message is displayed
When printing, you can continue printing the original.
If a message is displayed for the black toner cartridge while an I-Fax document is being received, the machine does not perform printing so that unclear print is avoided. To continue printing even if the amount remaining in toner cartridge is running low, set <Continue Print. When Amount in Cart. Low> to <On>. <Continue Print. When Amount in Cart. Low>
This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print a large job. This appears when <Action When Warning> is set to <Stop Printing> (<Action When Warning>).
<Display Recovery Steps> Displays the procedure for replacing a toner cartridge. Follow the on-screen instructions to replace the toner cartridge.
<Continue Printing> You can end a printing stoppage state and continue printing.
<Check Toner Cartridge Name> You can check the toner cartridge name.
If a message is displayed for the black toner cartridge while an I-Fax document is being received, the machine does not perform printing so that unclear print is avoided. Instead, the received data is stored in memory. To continue printing even if the amount remaining in toner cartridge is running low, set <Continue Print. When Amount in Cart. Low> to <On>. <Continue Print. When Amount in Cart. Low>
This message, which appears with the toner cartridge color(s), notifies you that a toner cartridge has reached the end of its lifetime. It is recommended that you replace the cartridge with a new one. You can continue printing, but the print quality cannot be guaranteed.
<Display Recovery Steps> Displays the procedure for replacing a toner cartridge. Follow the on-screen instructions to replace the toner cartridge.
<Continue Printing (Qlty. Not Guaranteed)> You can continue printing, but the machine may malfunction.
<Check Toner Cartridge Name> You can check the toner cartridge name.
<Cannot print. A non-Canon or counterfeit cartridge may be in use.>
This message notifies you that the machine may not print in optimum quality. It is recommended that you replace this cartridge with a new one.
When this message is displayed, you cannot continue printing. <Canon Genuine Mode>
When Printouts are Poor in Quality
If your printouts begin to show any of the following features, one of your toner cartridges is consumed. Replace the nearly empty toner cartridge even if no message is displayed. Procedure for Replacing the Toner Cartridge
Streaks Appear/Printing is Uneven
Partially faded
Uneven density
White Spots Appear
Toner smudges and splatters appear
Blank space of originals becomes grayish in printouts
Procedure for Replacing the Toner Cartridge
Do not touch the contacts () inside the machine
Doing so may result in a fault.
Be sure to hold the toner cartridge using the handle.
To avoid scratching the surface () of the drum inside the machine or exposing it to light. Do not touch the electrical contacts () or the toner cartridge memory ().
Read the precautions in "Important Safety Instructions" provided with this product before replacing the toner cartridges. Manuals and Their Contents
1
Open the front cover.
2
Pull out the cartridge tray.
3
Pull the target toner cartridge straight up and out of the machine.
4
Remove the replacement toner cartridge from the packing material.
1
Pull the tab of the packing material on a flat place.
2
Pull out the toner cartridge.
5
Shake the toner cartridge 5 or 6 times as shown below to evenly distribute the toner inside the cartridge.
Do not touch the surface of the drum on the bottom of the toner cartridge.
6
Install the toner cartridge.
Each toner cartridge color has its own slot in the toner cartridge tray, and this tray is indicated with a corresponding color label (). Place the toner cartridge into the slot that corresponds to its color.
The bottom surface of the toner cartridge is exposed; therefore, be careful not to bump the toner cartridge against the slot frame when inserting it into the slot.
7
Push the toner cartridge tray back in, and close the front cover.
Immediately after the front cover is closed, the quick adjustment (Quick Adjust) starts.
This site uses cookies to provide its contents and functions and improve their qualities etc. You can find out more about our use of the cookies here. If you select "Reject", only cookies necessary to provide the contents and functions of the site are recorded and stored.