<Security Settings>
All the settings related to the authentication function and encryption are listed with descriptions. Default Settings are marked with a dagger (
).
).<Authentication/Password Settings>
You can reinforce the security of the authentication function.
<Authentication Function Settings>
Configure the security functions for user authentication.
<Lockout Settings>
When a user has failed user authentication, specify whether to disable the user from temporarily logging in to the machine (lockout). When <On> is selected, specify how many consecutive times failures are permitted before lockout is activated and also the time required before a user can log in again after lockout.
<Enable Lockout> <Off> <On> <Lockout Threshold> 1 to 10 (time(s))<Lockout Period> 1 to 60 (min.) |
<Menu> 
<Management Settings> <Security Settings> <Authentication/Password Settings> <Authentication Function Settings> <Lockout Settings> <Enable Lockout> <On> Specify each setting item Restart the machine
<Management Settings> <Security Settings> <Authentication/Password Settings> <Authentication Function Settings> <Lockout Settings> <Enable Lockout> <On> Specify each setting item Restart the machine
This option is not applied to login using the department ID.
<Encryption Settings>
Configure a setting for disabling a weak encryption or the key and certification using a weak encryption.
<Prohibit Use of Weak Encryption> <Off> <On> <Prohibit Key/Cert. with Weak Encryption> <Off> <On> |
<Menu> <Management Settings> <Security Settings> <Encryption Settings> <Prohibit Use of Weak Encryption> <On> <Prohibit Key/Cert. with Weak Encryption> Select <Off> or <On> Restart the machine
<Management Settings> <Security Settings> <Encryption Settings> <Prohibit Use of Weak Encryption> <On> <Prohibit Key/Cert. with Weak Encryption> Select <Off> or <On> Restart the machine<Verify System at Startup>
When the machine starts, verification is performed to determine that the system has not been tampered. If tampering is detected, the machine enters a state to wait for firmware update. In this case, perform a firmware update operation from a computer. Updating the Firmware
<Off> <On> |
<Menu> <Management Settings> <Security Settings> <Verify System at Startup> <On> 
Restart the machine automatically
<Management Settings> <Security Settings> <Verify System at Startup> <On> Restart the machine automatically |
If nothing is displayed even after a while, system recovery may be impossible. In this case, contact your dealer or service representative. |