<Function Settings> <Send> <E-mail Settings><Send>
This section describes how to specify the e-mail print settings.
<Communication Settings>
<Set> <Function Settings> <Send> <E-mail Settings>
<Function Settings> <Send> <E-mail Settings>You can configure the settings for using the e-mail print function. Other settings related to e-mail printing, such as the settings for a mail server, must be configured from the Remote UI. Configuring E-Mail Print Settings
 |
If you set shorter than 10 minutes (excluding '0 min') for <POP Interval>, the machine will not completely enter the Sleep mode. |
<Confirm TLS Certificate for POP RX>
<Set> <Function Settings> <Send> <E-mail Settings>
<Function Settings> <Send> <E-mail Settings>You can check whether the TLS server certificate is valid when receiving with POP. You can verify the validity of the certificate and reliability of the certificate chain, as well as confirm the CN (Common Name).
|
If you do not verify the certificate, TLS communication is performed, even with an invalid certificate. |
 |
If there is a problem with the certificate, POP receiving will fail. |