Replacement Parts

This section describes the replacement parts (consumables/consumable parts) used by the machine. Purchase the replacement parts from the authorized Canon dealer that you purchased the machine from. Follow the precautions when handling and storing the replacement parts.

For optimum print quality, using Canon genuine Toner, Cartridge and Parts is recommended.

Consumables

Consumable Parts


For information on handling and storing the replacement parts, follow the precautions indicated in the Important Safety Instructions included with the machine. You can check the current amount of replaceable parts remaining. Checking the Remaining Amount of Consumables

Consumables

Toner Cartridge for Replacement

Confirm that the code on the front cover of the machine and the one on the package of the genuine toner are the same.

Model name	Genuine Canon toner
imageRUNNER ADVANCE DX 4845i / 4845 / 4835i / 4835 / 4825i / 4825	Canon NPG-86 Toner Black


Store Toner Containers as Described Below Store toner containers in the following conditions: Storage temperature range: 40ºC or less Preferred storage environment: 30ºC or less, 85% RH or lower Store unopened until immediately prior to use. When storing toner containers, do not store them upright or upside down. Do not store toner containers in the following locations: Locations exposed to open flames Locations exposed to direct sunlight Locations exposed to excessively salty air Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia) Very hot and/or humid locations Locations subject to dramatic changes in temperature and humidity likely to cause condensation Very dusty locations Locations within the reach of children Locations close to products that emit magnetism

Store Toner Containers as Described Below

Store toner containers in the following conditions:

Storage temperature range: 40ºC or less

Preferred storage environment: 30ºC or less, 85% RH or lower

Store unopened until immediately prior to use.

When storing toner containers, do not store them upright or upside down.

Do not store toner containers in the following locations:

Locations exposed to open flames

Locations exposed to direct sunlight

Locations exposed to excessively salty air

Locations heavily exposed to corrosive gases (e.g. aerosol sprays or ammonia)

Very hot and/or humid locations

Locations subject to dramatic changes in temperature and humidity likely to cause condensation

Very dusty locations

Locations within the reach of children

Locations close to products that emit magnetism


Be careful of counterfeit toners Please be aware that there are counterfeit Canon toners in the marketplace. Use of counterfeit toner may result in poor print quality or machine performance. Canon is not responsible for any malfunction, accident or damage caused by the use of counterfeit toner. For more information, see global.canon/ctc.


For information on the collection of used toner cartridges, see the Important Safety Instructions.

Drum Unit

Product Name	Model Number
imageRUNNER ADVANCE DX 4845i / 4845 / 4835i / 4835 / 4825i / 4825	Canon NPG-86 Drum Unit

Staple Cases for Replacement

Always use the dedicated replacement staple cases for this machine. Note that the model number of the staples to use differs according to the finisher.

Finisher name	Genuine Canon staple case
Staple Finisher-AE Booklet Finisher-AE Inner Finisher-L	Staple-P1
Booklet Finisher-AE	Staple Cartridge-Y1

Consumable Parts

Waste Toner Container

Make sure to use the dedicated waste toner container for this machine.

WT-202

Fixing Assembly

Follow the instructions provided to your dealer or service representative.

FX-502

ADF Maintenance Kit (for 2-Sided Double Pass Feeder (DADF-BA))

Follow the instructions provided to your dealer or service representative.

DR-202

ADF Maintenance Kit (for 2-Sided Single Pass Feeder (Single Pass DADF-C))

Follow the instructions provided to your dealer or service representative.

DR-205