Sending Faxes Manually (Manual Sending)

You can manually send fax documents after checking that the destination is ready to receive fax transmissions.
If you have added additional lines, you can only use Line 1 (the standard line) for manual sending.
To send fax documents manually by pressing <On-Hook>, set <Use ACCESS MANAGEMENT SYSTEM> to <Off>. If it is set to <On>, you may not be able to send documents. Using ACCESS MANAGEMENT SYSTEM
If the control card is removed while a call is being made by pressing <On-Hook> with the Copy Card Reader attached, the line is disconnected.
Place the original. Placing Originals
When you want to send multiple pages, place originals in the feeder. When the original is placed on the platen glass, you can only send one page.
Press <Fax>. <Home> Screen
Press <On-Hook> on the Fax Basic Features screen. Fax Basic Features Screen
Enter the recipient's phone number.
Make sure that you hear the recipient or a high-pitched tone.
Press  (Start).
Originals are scanned and sending starts.
Manual Sending is not available in the following cases
When any of the following functions is specified in the scan settings:
<2-Sided Original>
<Different Size Originals>
<Erase Frame>
<Job Build>
<Delayed Send>
(The functions that can be specified differ depending on your model.)
<Limit Functions> is set to <Off> for any function when the machine is in the Department ID mode. Configuring the Department ID Management Settings
To specify the scanning size of originals
The scanning size of originals placed in the feeder is automatically set. To specify the size yourself, use the platen glass.