[Display Settings]

Configure the operation panel screen displays.
* Values in bold red text are the default settings for each item.

[Default Screen After Startup/Restoration]

[Menu]

[Preferences]

[Display Settings]

Specify the screen displayed after the start screen appears when the machine is turned ON and immediately after an Auto Reset.
Setting this for the [Status Monitor] enables you to also specify the screen displayed immediately after the [Status Monitor] screen is closed.

[Home]

[Copy]

[Fax]

[Scan]

[Secure Print]

[Status Monitor]

[Home]

[Copy]

[Fax]

[Scan]

[Secure Print]

[Home Screen Button Display Settings]

[Menu]

[Preferences]

[Display Settings]

Add shortcut buttons and rearrange the buttons so that you can run frequently used functions more quickly from the [Home] screen of the operation panel. Customizing the [Home] Screen

[Select Button to Display]

[Favorite Copy Settings]

[Favorite Fax Settings]

[Favorite Scan Settings]

[Set Display Order]

[Language]

[Menu]

[Preferences]

[Display Settings]

Change the language shown on the operation panel and used in printed reports.

* Depending on your country or region, the [Language] setting may not be available, or its content or default setting may be different.

[Deutsch]

[English]

[Español]

[Français]

[Italiano]

[Português]

[日本語]

[中文(繁體)]

[中文(简体)]

[한국어]

[Remote UI Language]

[Menu]

[Preferences]

[Display Settings]

Change the language shown on Remote UI screens.

* Depending on your country or region, the [Remote UI Language] setting may not be available, or its content or default setting may be different.

[English]
[Japanese]
[French]
[Spanish]
[German]
[Italian]
[Portuguese]
[Chinese (Simplified)]
[Chinese (Traditional)]
[Korean]

[Notify to Clean Orig. Scan Area]

[Menu]

[Preferences]

[Display Settings]

Specify whether a message is displayed to notify you if soiling is detected during feeder use.

[Off]
[On]

[Millimeter/Inch Entry Switch]

[Menu]

[Preferences]

[Display Settings]

Change the units shown on the screen for entering length and width.

[Millimeter]

[Inch]

[Gram/Pound Switch]

[Menu]

[Preferences]

[Display Settings]

You can change the units displayed such as for the paper weight.

* [Gram/Pound Switch] is only displayed when [Select Country/Region] is set to [United States (US)] or [Canada (CA)].

[Gram]

[Pound]

[Display Timing for Cart. Prep.]

[Menu]

[Preferences]

[Display Settings]

When the toner in a toner cartridge runs low, a message appears notifying you to prepare a new toner cartridge. To manually specify when this message appears (the toner level in a cartridge), set [Auto] to [Off] and specify the timing in [Custom].
When [Auto] is set to [On], the machine automatically decides when to display the message.

[Auto]

[Off]

[Custom]

2 to 20 to 99 (%)

[On]

[Display Notif. to Clean Fixing Assembly]

[Menu]

[Preferences]

[Display Settings]

Select whether to notify you by displaying a message when the fixing assembly requires cleaning.

[Off]

[On]

[1000 to 50000]

[Show Warnings]

[Menu]

[Preferences]

[Display Settings]

Specify whether a notification message is displayed when a toner cartridge is low on toner.

* If the machine is configured to stop printing when a toner cartridge is low on toner, this cannot be set to [Off]. [Action When Warning]

* If the machine is configured not to print incoming faxes and I-Faxes when a toner cartridge is low on toner, the message appears even when this is set to [Off]. [Continue Print. When Cart. Low]

[Off]

[On]

[Action When Warning]

[Menu]

[Preferences]

[Display Settings]

Specify whether to continue printing when a toner cartridge is low on toner.
If this is set to [Stop Printing], a notification message appears when the toner cartridge runs low on toner. [Show Warnings]

[Low Cartridge Level]

[Continue Printing]

[Stop Printing]

[Display IP Address]

[Menu]

[Preferences]

[Display Settings]

Specify whether to display the machine’s IPv4 address in the [Status Monitor] screen. [Status Monitor] Screen

[Off]

[On]