Selecting Wired or Wireless LAN

Set whether to connect the machine to the network using a wired or wireless LAN.
If you want to switch from wired LAN to wireless LAN, you can make the setting during the procedure for connecting to wireless LAN. Connecting to a Wireless LAN
* You cannot connect to a wired LAN and wireless LAN at the same time.
Use the operation panel to configure the settings. On the operation panel, you can also configure the settings by pressing [Menu] in the [Home] screen  [Preferences]. You cannot configure the settings using Remote UI from a computer.
Administrator privileges are required.
1
On the operation panel, press [] (wired LAN) or [] (wireless LAN) in the [Home] screen. [Home] Screen
The [Network] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System Manager ID and PIN
2
Press [Select Wired/Wireless LAN].
3
Select [Wired LAN] or [Wireless LAN].
The message [Settings configured.] appears.
Next, connect to the wired or wireless LAN.
Connecting to a Wired LAN
Connecting to a Wireless LAN
When Switching between Wired and Wireless LAN
Any installed drivers must be uninstalled and then reinstalled.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
84CS-061