Changing the Print Settings of the Received I-Fax
Received I-Faxes are printed on A4 size paper on one side by default. You can change the settings to print on both sides and on different size paper. You can print the received date and time and page number as well.
Printing on Both Sides and on Different Size Paper
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [I-Fax Settings]
Administrator privileges are required.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [I-Fax Settings]
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [RX/Forwarding Settings] 
[I-Fax Settings] [Edit].
[I-Fax Settings] [Edit].The [Edit I-Fax Settings] screen is displayed.
4
Change the print settings.
[Print on Both Sides]
Select this checkbox to print on both sides of the paper.
[RX Print Size]
Select the paper size for printing the received data.
5
Click [OK].
The settings are applied.
6
Log out from Remote UI.
Printing the Received Date and Time and Page Number
Select whether to print the following information at the bottom of received faxes: Reception date and time Received reception number Page number |
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Print RX Page Footer]
Administrator privileges are required.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to configure the settings. [Print RX Page Footer]
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode. Starting Remote UI
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of Remote UI
3
Click [RX/Forwarding Settings] [Common Settings] [Edit] in [Common Settings].
[Common Settings] [Edit] in [Common Settings].The [Edit Common Settings] screen is displayed.
4
Select the [Add RX Page Footer] checkbox.
5
Click [OK].
The settings are applied.
6
Log out from Remote UI.