[Maintenance]
Carry out maintenance to clean the machine and control condensation.
* Values in bold red text are the default settings for each item.
* Values in bold red text are the default settings for each item.
[Clean Fixing Assembly]
[Menu] 
[Adjustment/Maintenance] [Maintenance]
[Adjustment/Maintenance] [Maintenance]Perform this operation to clean the fixing assembly if black streaks appear on printed paper following procedures such as toner cartridge replacement. Cleaning the Fixing Assembly
[Clean ITB]
[Menu] [Adjustment/Maintenance] [Maintenance]
[Adjustment/Maintenance] [Maintenance]If the printout is smudged, the transfer belt (ITB) inside the machine may be dirty. Perform this operation to clean the transfer belt. Cleaning the Transfer Belt
[Control Condensation]
[Menu] [Adjustment/Maintenance] [Maintenance]
[Adjustment/Maintenance] [Maintenance]In environments subject to sudden temperature changes, condensation may form and cause images and/or text to be faint or blurred. If so, specifying [On] may improve the print results.
During condensation removal, a blank sheet of paper may be output without printing correctly. If you set this to [On], you can set whether to restrict printing.
During condensation removal, a blank sheet of paper may be output without printing correctly. If you set this to [On], you can set whether to restrict printing.
* If you set this to [On], you must keep the machine ON to continuously remove the condensation. The Auto Shutdown Time setting is disabled.
[Off] [On] [Allow Job Printing During Process] [Do Not Allow Job Printing During Process] |