[UFR II] Settings


NOTE
These settings are applicable only when printing in the UFR II mode.

[Halftones]


[Text]: [Color Tone], [Resolution]*, [Gradation], [High Resolution]
[Graphics]: [Color Tone]*, [Resolution], [Gradation], [High Resolution]
[Image]: [Color Tone]*, [Resolution], [Gradation], [High Resolution]

This setting specifies how to express halftones.
Settings can be applied separately for text, graphics, and image data.

[Color Tone]

You can print with sharp gradation and well-balanced texture, contrasting light and shade, which is best for printing images.

[Resolution]

A dither pattern that gives priority to the resolution of the images is used. This helps eliminate the appearance of jagged or uneven lines along the edges of objects and is best for printing standard text and graphics.

[Gradation]

A dither pattern that gives priority to the appearance of smooth changes in tone is used. This is best for reproducing images with delicate gradations or changes of tone.

[High Resolution]

Finer printing can be done than with [Resolution], although toner stability is somewhat weaker. This is suited to printing small characters and fine lines, and outlines (such as from CAD data) sharply.

[Halftones] (6800 / 6000 / 4900 / 4800 Series)


[Text]: [Resolution]*, [Gradation], [Error Diffusion]
[Graphics]: [Resolution], [Gradation]*, [Error Diffusion]
[Image]: [Resolution], [Gradation]*, [Error Diffusion]

This setting specifies how to express halftones.
Settings can be applied separately for text, graphics, and image data.

[Resolution]

A dither pattern that gives priority to the resolution of the images is used. This helps eliminate the appearance of jagged or uneven lines along the edges of objects and is best for printing standard text and graphics.

[Gradation]

A dither pattern that gives priority to the appearance of smooth changes in tone is used. This is best for reproducing images with delicate gradations or changes of tone.

[Error Diffusion]

This mode is suitable for printing data with text and thin lines and the curved lines of CAD data, etc.
NOTE
The stability of the texture and fixed toner may be reduced when this mode is used.

[Paper Save]


[On]*, [Off]

This setting specifies whether to output a blank page when there is no data to print on the page.

[On]

A blank page is not output, thus saving paper.

[Off]

A blank page is output.
NOTE
Depending on the content of print data, some pages may not be determined as blank even if nothing is drawn on the print area of those pages.
9785-00R