[Paper Output]

[Finishing]


[Off], [Collate], [Group]*, [Rotate+Collate], [Rotate+Group], [Offset+Collate], [Offset+Group], [Staple+Collate], [Staple + Group], [Eco(Stpl-Fr) + Collate], [Eco (Stpl-Fr) + Group]
Copies to Offset (Offset+Collate):
1 to 9999; 1*
Binding Position (Staple+Collate and Staple + Group):
Corner (Upper-L), Double (Top), Corner (Upper-R), Double (Right), Corner (Lower-R), Double (Bottom), Corner (Lower-L), and Double (Left)
Binding Position (Eco(Stpl-Fr) + Collate and Eco (Stpl-Fr) + Group):
Corner (Upper-L), Corner (Upper-R), Corner (Lower-R), and Corner (Lower-L).

[Off]

This setting prints all copies of the same page before printing the next page.

[Collate]

This setting prints all pages of each copy before printing the next copy.

[Group]

This setting prints all copies of the same page before printing the next page.

[Rotate+Collate]

This setting prints all pages of each copy (collating), and rotates every other complete copy 90 degrees to indicate where each copy starts.

[Rotate+Group]

This setting prints all copies of the same page before printing the next page. It rotates every other complete set of pages to indicate where each new set starts.

[Offset+Collate]

This setting prints all pages of each copy (collating). It offsets every other complete copy by the number specified with this setting to indicate where each copy starts.

[Offset+Group]

This setting prints all copies of the same page before printing the next page. It offsets every other complete set of pages to indicate where each new set starts.

[Staple+Collate]

This setting prints all pages of each copy (collating), and prepares them for stapling according to the option selected for [Staple+Collate].

[Staple + Group]

This setting prints all copies of the same page before printing the next page, and prepares them for stapling according to the option selected for [Staple + Group].

[Eco(Stpl-Fr) + Collate]

This setting prints all pages of each copy (collating), and prepares them for binding without staples.

[Eco (Stpl-Fr) + Group]

This setting prints all copies of the same page before printing the next page, and prepares them for binding without staples.

Examples of each Finishing option when printing three copies of a three page document:
Off
Collate
Group
Rotate+Collate
Rotate+Group
Offset+Collate
Offset+Group
Staple+Collate, Eco(Stpl-Fr) + Collate
Staple + Group, Eco (Stpl-Fr) + Group

IMPORTANT
A large print job may be automatically canceled by the machine.
NOTE
When you are stapling paper in landscape orientation, the image orientation and the staple position may not match.

[Punch]


[Punch]: [On], [Off]*
[Punch Position]: [Left]*, [Right], [Top], [Bottom]
[Punch Type]: [Finisher (2 Hole)], [Finisher (3 Hole)], [Finisher (4 Hole)], [Puncher Unit]

This setting enables you to specify the desired paper position for holes to be punched for binding.

NOTE
This function is available for selection if the puncher unit is attached to the finisher.
The available paper sizes for hole punching vary according to the puncher that is attached. (See "User's Guide.")
Make sure to select compatible settings when using Staple and Punch simultaneously. If conflicting settings are selected, such as the staple setting for the right side of the paper and the punch setting for the left, the machine will use neither Staple nor Punch.
8ES3-00E