<Register Finishing Size>
This section describes how to register finishing size.
|
For information on the items ("A," "B," "C," and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
<Finishing Size for Finishing/Booklet (Trim)> *
(Settings/Registration) 
<Function Settings> <Common> <Register Finishing Size>You can register finishing sizes for the finishing/Booklet (Trim), assign them names, and edit or delete them as necessary. This mode is useful for registering frequently used finishing sizes.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Finishing Size for Finishing/Booklet (Trim)> | <S1> to <S5>: <Register/Edit>, <Delete>, <Rename> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
|
This mode can be set when the "Booklet Trimmer-G" and "Two-Knife Booklet Trimmer-B" are attached. For more information, see the instruction manual for the each device. If you select a button that already has settings stored in it, the settings are displayed. You can also name buttons with no settings stored in them. If you press <Delete>, the registered values will be deleted and become <Not Registered>. The name remains the same. If you press <OK> without entering any characters, the button name reverts to its current name (default S1 to S5). |