<Paper Output Settings>
Specify the Paper Output Settings that are common to all the functions.
|
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function. Item marked with an asterisk (*)Only appears if you have the option installed. |
<Output Tray Settings> *
(Settings/Registration) 
<Function Settings> <Common> <Paper Output Settings>You can set the tray to output to for each function. Specifying the Output Tray for Preprinted Paper
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Output Tray Settings> | <Tray A>: <Access Stored Files>, <Printer>, <Other> <Tray B>: <Access Stored Files>, <Printer>, <Other> <Tray C>: <Other> | Yes | Yes | Yes | No | A | Settings/Registration Basic Information |
<Stacker Output Tray Settings> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can specify the stacker output tray when multiple stackers are attached.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Stacker Output Tray Settings> | <Output Tray (Stacker a)>, <Output Tray (Stacker b)> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<Specify Maximum Number of Sheets to Load in Stacker> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can specify the maximum number of sheets to load in the stacker.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Specify Maximum Number of Sheets to Load in Stacker> | <On>, <Off> Set value: 1 to 2000 to 3000 | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
 |
Up to 3000 sheets can be specified. If the number of sheets is set at almost limit of loading, printing may stop before reaching the loading limit you specify due to paper conditions such as curled paper or the paper thickness. |
<Auto Eject Paper on Stacker Tray at Job End> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>If <Auto Eject Paper on Stacker Tray at Job End> is set to <On>, the tray automatically moves to the outside of the stacker when the job is complete. This function is useful if you remove the stack of paper in each job.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Auto Eject Paper on Stacker Tray at Job End> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<High Volume Stack Mode> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>If your machine has multiple output trays, and is equipped with a finisher, you can fix the tray designation settings.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<High Volume Stack Mode> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
|
If <High Volume Stack Mode> is set to <On>, the output order for Tray B is set to <1>, so that a priority to Tray B cannot be changed. However, if the output order for Tray C is set to <1> when the "High Capacity Stacker-J" is attached, the priority is given to Tray C. <Output Tray Settings> If <High Volume Stack Mode> is change from <On> to <Off>, the output order is not changed. <Output Tray Settings> The <High Volume Stack Mode> cannot be set while you are printing. If the <Limited Functions Mode> for a finisher is set to <On>, the <High Volume Stack Mode> is not available. If a Finishing mode is set, the output trays move downward as the stack of paper that is output increases in quantity and thickness. Once an output tray has reached its stacking limit, subsequent prints are automatically delivered to the next available tray. If all of the available trays have reached their stacking limits, printing stops temporarily. Remove all of the output paper from the trays. The trays move upward, and printing resumes. |
<Offset Jobs> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>This enables you to shift the output for each job when multiple jobs are printed consecutively.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Offset Jobs> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<Job Separator Between Jobs>
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>This enables you to insert the specified paper at the start of each job when multiple jobs are printed consecutively.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Job Separator Between Jobs> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
<Change> (Select Paper Source) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
<Job Separator Between Copies>
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>This enables you to insert the specified paper each number of copy sets to divide the sets. If you set this, paper is inserted when printing with Collate (Page Order), Offset, or Staple.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Job Separator Between Copies> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
<Copies> (1 to 10 to 9999) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information | |
<Change> (Select Paper Source) | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
 |
You cannot insert job separation sheets between copy sets in the following cases. Note that the available functions and papers differ depending on installed options. If you are using the Group, Booklet, Saddle Stitch, or Fold mode. If you are using tab paper. |
<Job Separator After Removing Stacker Paper Jam> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>When you restart a print job after clearing a paper jam in the stacker, this mode enables you to insert a blank page before the first page of each print job from a selected paper deck.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Job Separator After Removing Stacker Paper Jam> | <On>, <Off> <Change>: Select paper souse | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<Different Paper Sizes for Output Tray> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can output different sized papers to the same output tray of the finisher.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Different Paper Sizes for Output Tray> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
|
If you set both the Different Size Originals and Staple modes, outputs are stapled and collated, regardless of the Different Paper Sizes settings. If you set <Different Paper Sizes for Output Tray> to <Off>, printing may stop when the message <Remove the paper from the output tray.> appears. To resume printing, remove all of the paper from the output tray. Even if you set <Different Paper Sizes for Output Tray> to <Off>, different paper size may be output to the same output tray if there is only a small amount of paper in the paper tray. |
<Align Output Paper of Diff. Sizes (Diff. Widths)> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can select whether to align the output paper by paper width when paper with different width is used for printing.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Align Output Paper of Diff. Sizes (Diff. Widths)> | <On>, <Off> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
|
If you use paper smaller than STMTR, the output paper cannot be aligned. |
|
If you set <Align Output Paper of Diff. Sizes (Diff. Widths)> to <On>, the machine automatically suspend the print job when paper with different width is output so that you can remove the output paper. When <Align Output Paper of Diff. Sizes (Diff. Widths)> is set to <On>, printing stops temporarily if all of the available output trays have reached their stacking limits. If you remove the output paper from the trays, the trays move upward and printing resumes. Even when <Align Output Paper of Diff. Sizes (Diff. Widths)> is set to <Off>, you can align output paper if you are using paper with the same width. |
<Unprocessed Tab Paper Forced Output>
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can set whether to force to output excess tab paper that was not used.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Unprocessed Tab Paper Forced Output> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |
|
If <Unprocessed Tab Paper Forced Output> is set to <On>, the extra amount of tab paper sheets that were not required for the job are forced out of the machine. Example: If the number of tabs is set to <5> and the machine estimates that seven sheets of tab paper are needed for the print job, you must prepare two sets of tab paper each containing five tabs (10 total). Therefore, if the machine only uses seven tab paper sheets, three tab paper sheets will remain. |
<Normal/Reverse Order Output with External Finisher> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can change the output order for delivering paper from the "High Capacity Stacker-J" to the external finisher.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Normal/Reverse Order Output with External Finisher> | <Normal Order>, <Reverse Order> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<Face Up/Face Down Output with External Finisher> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can specify whether to output face up or face down for delivering paper from the "High Capacity Stacker-J" to the external finisher.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Face Up/Face Down Output with External Finisher> | <Face Up>, <Face Down> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
|
This settings for the imagePRESS Server are given priority in this mode. |
<Image Orientation When Output with External Finisher> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can change the output image orientation for delivering paper from the "High Capacity Stacker-J" to the external finisher.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Image Orientation When Output with External Finisher> | <Do Not Rotate>, <Rotate 180 Degrees> | Yes | Yes | Yes | Yes | C | Settings/Registration Basic Information |
<Action When Too Many Sheets to Staple> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>You can specify the procedure to perform when there are too many sheets to staple.
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Action When Too Many Sheets to Staple> | <Corner/Double>: <Print without Stapling>, <Cancel Printing> <Saddle Stitch>: <Print without Stapling>, <Cancel Printing> | Yes | Yes | No | No | B | Settings/Registration Basic Information |
|
For information on printing using stapling, see Finishing with the Stapler. |
<Enable Offset for Single-Sheet Print Jobs> *
(Settings/Registration) <Function Settings> <Common> <Paper Output Settings>Specifying <On> in this setting allows you to output single-page print jobs with the sheet offset in the following situations:
Shift is specified when job is received
Printing of multiple copies is specified when job is received
Item | Setting Description | DeviceAdmin | NetworkAdmin | Can be set in Remote UI | Device Information Delivery Available | Import All Function | Name of Item When Exporting with the Remote UI |
<Enable Offset for Single-Sheet Print Jobs> | <On>, <Off> | Yes | Yes | Yes | No | C | Settings/Registration Basic Information |