<Maintenance>

Specify the settings for the machine's auto cleaning function.
 
For information on the items ("A", "B", "C", and "No") in the "Import All Function" column, see Import All Function.
Item marked with an asterisk (*)
Only appears if you have the option installed.

<Clean Inside Main Unit>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
If streaks appear on printed paper or part of the image is missing, execute <Clean Inside Main Unit>.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Inside Main Unit>
Start Cleaning
Yes
Yes
No
No
No
-

<Clean Feeder> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Feeder>
Start Cleaning
Yes
Yes
No
No
No
-

<Clean Wire>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
If dirt or streaks appear on printed output, clean the corona assembly wires inside the main unit.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Wire>
Start Cleaning
Yes
Yes
No
No
No
-

<Clean Roller>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Roller>
Start Cleaning
Yes
Yes
No
No
No
-

<Clean Belt>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
If streaks (both vertical and horizontal) or spots (both light and dark shades) appear on printed output, clean the belt.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Clean Belt>
Start Cleaning
Yes
Yes
No
No
No
-
Before starting the belt cleaning, make sure to load three or more sheets of plain paper into the upper paper drawer of the main unit.
When loading paper, it is also recommended to use the largest size of paper that you frequently use for printing.
Any dirt may remain even if you perform the belt cleaning. In this case, perform the belt cleaning again.

<Original Scanning Area Cleaning Method> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
Start the video that shows how to clean the platen glass.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Original Scanning Area Cleaning Method>
Displays the Cleaning Method
Yes
Yes
No
No
No
-

<Refresh Fixing Area>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
When paper with a longer width is used after copying or printing 100 or more sheets of paper with a shorter width (for example, when you use A3 paper after A4R paper), luster streak may appear on both edges in the feeding direction. In addition, patches of uneven gloss may appear in the high density areas of the printed heavy paper or coated paper. In this case, the streaks and patches of uneven gloss may be reduced by refreshing the fixing area.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Refresh Fixing Area>
Start Refresh
Yes
Yes
No
No
No
-
Users other than the administrators should not change the settings. For instructions on changing the settings, contact your dealer or service representative.

<Fixing Area Auto Refresh Level>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
The fixing area is refreshed automatically every several sheets of paper is printed. You can adjust the frequency and the time used for each refreshing.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Fixing Area Auto Refresh Level>
<Level (-5-+5)>: -5 to 0 to +5
Yes
Yes
No
No
No
-
Users other than the administrators should not change the settings. For instructions on changing the settings, contact your dealer or service representative.

<Check Maintenance Method>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
For information on how to replace consumables and remove jammed paper, see the sample video.

<Initialize After Puncher Unit Die Lubrication> *

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
You can clear the warning message about lubrication of the "Multi Function Professional Puncher-C" from the screen.
Item
Setting Description
DeviceAdmin
NetworkAdmin
Can be set in Remote UI
Device Information Delivery Available
Import All Function
Name of Item When Exporting with the Remote UI
<Initialize After Puncher Unit Die Lubrication>
<Yes>, <No>
Yes
Yes
No
No
No
-
Clear the warning message after lubrication. Continuing to use the die without lubricating it may cause paper jams and shorten its lifetime.
After lubrication, print a few pages to check that the output paper is not greasy before performing jobs.

<Initialize After Replacing Parts>

 (Settings/Registration)  <Adjustment/Maintenance>  <Maintenance>
You must initialize the printer after replacing parts. Initialize the printer for each replaced part.
A717-0UX