[Special Processing]
Use a range of processes to resolve problems that arise due to factors such as the paper type, the material used, or its condition.
* Values in bold red text are the default settings for each item.
* Values in bold red text are the default settings for each item.
[Special Paper Processing]
[Menu] 
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Specify special processing for the paper in the following situations: If you are using special paper To print on the back of printed paper For paper with a rough surface If the envelope flap is stuck down If the paper curls during printing |
[Manual Back Side Print (2-Sided Only)]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]If you are using paper that has already been printed on, toner smudges and splatters may appear on the back side. If so, specifying [On] for that paper source may improve the print results.
* When this is set to [On], if some time has passed since the front side of the paper was printed, or depending on the operating environment humidity, changes in image quality or paper jams may occur.
[Multi-Purpose Tray] [Off] [On] [Drawer 1] [Off] [On] |
[Rough Surface Paper Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper Processing]If you are using paper with a rough surface, printed images may appear faint. If so, specifying [On] for that paper source may improve the print results.
* Specifying [On] in this setting may lead to slower print speeds or changes in the image quality.
[Multi-Purpose Tray] [Off] [On] [Drawer 1] [Off] [On] |
[High Humidity Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Printing in a high-humidity environment may cause uneven print density. If so, specifying [On] may improve the print results.
* Specifying [On] in this setting may lead to blurred images and/or text in low-humidity environments.
[Off] [On] |
[Low Humidity Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Printing in a low-humidity environment may lead to blurred images and/or text. If so, specifying [On] may improve the print results.
* Specifying [On] in this setting may lead to faint or uneven printing in high-humidity environments.
[Off] [On] |
[Prevent Postcard Fogging]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]The whole surface of a printed postcard may appear darkened. If so, specifying [Mode 1] in this setting may improve the print results. If this does not solve the problem, specify [Mode 2].
* When this setting is enabled, lines may become thinner, ghost images may appear in a blank area, or the print density may decrease.
[Off] [Mode 1] [Mode 2] |
[Talc Paper Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Printing in a high-temperature or high-humidity environment may cause white spots on a printed image. If so, specifying [On] in this setting may improve the print results.
* When you select [On], the print quality may be affected.
[Off] [On] |
[Prevent Image Distortion]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]If the whole page is printed grayish, specifying this setting to [On] may improve the quality of the printout.
* Specifying [On] may reduce the print speed.
[Off] [On] |
[Select Line Width]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]If you want to change the width of printed lines, specifying this setting may improve the print result.
*Changing this setting may affect the print density.
[Auto] [Thin] [Slightly Thin] [Slightly Thick] [Thick] |
[Prevent Stains on Printed Images]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]The printed paper may be partially dirty. If so, specifying [On] in this setting may improve the print results.
* Specifying [On] may reduce the print speed.
[Off] [On] |
[Correct Blurry Image for Copy]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Depending on the paper type or the usage environment of the machine, there may be blurry stains on the copied paper. If so, specifying this setting may improve the situation. First, specifying [Mode 1] may correct the problem. If this does not correct the problem, select [Mode 2] and [Mode 3] in that order.
* When this setting is enabled, the print density may decrease.
[Off] [Mode 1] [Mode 2] [Mode 3] |
[Correct Blurry Image]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
[Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]Depending on the paper type or the usage environment of the machine, there may be blurry stains on the printed paper. If so, specifying this setting may improve the situation. First, specifying [Mode 1] may correct the problem. If this does not correct the problem, select [Mode 2], [Mode 3], and [Mode 4] in that order.
* When this setting is enabled, the print density may decrease or the print speed may be slower.
[Off] [Mode 1] [Mode 2] [Mode 3] [Mode 4] |