[Volume Settings]

Set whether the machine emits sounds notifying you of operations and statuses. Adjusting the Volume (For Models with a Fax Function)
* Values in bold red text indicate the default setting for each item.
* [Volume Settings] may not be displayed depending on the model, the installed options, and other settings.
[Fax Tone]
[Ring Tone]
[TX Done Tone]
[RX Done Tone]
[Scanning Done Tone]
[Entry Tone]
[Invalid Entry Tone]
 
[Restock Supplies Tone]
[Warning Tone]
[Job Done Tone]
[Energy Saver Alert]
[Original in Feeder Detection Tone]

[Fax Tone]

[Menu] [Preferences] [Volume Settings]
Adjust the volume of the dial tone while sending a fax.
4 levels

[Ring Tone]

[Menu] [Preferences] [Volume Settings]
Adjust the volume of the dial tone while sending a fax.
4 levels

[TX Done Tone]

[Menu] [Preferences] [Volume Settings]
Adjust the volume of the beep to notify when sending a fax is complete. You can set the machine to beep only when a sending error is occurred.
4 levels
[When Error]
[Off]
[On]

[RX Done Tone]

[Menu] [Preferences] [Volume Settings]
Adjust the volume of the beep to notify when receiving a fax is complete. You can set the machine to beep only when a receiving error is occurred.
4 levels
[When Error]
[Off]
[On]

[Scanning Done Tone]

[Menu] [Preferences] [Volume Settings]
Adjust the volume of the beep to notify when receiving a fax is complete. You can set the machine to beep only when a receiving error is occurred.
4 levels
[When Error]
[Off]
[On]

[Entry Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when you press the keys and buttons on the control panel.
[Off]
[On]

[Invalid Entry Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when an invalid key is pressed, such as when you enter a value outside the setting range.
[Off]
[On]

[Restock Supplies Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the toner cartridges are nearing the end of their lifetime.
[Off]
[On]

[Warning Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the machine has a paper jam or other malfunction.
[Off]
[On]

[Job Done Tone]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when an operation on the machine is completed, such as copying or scanning.
[Off]
[On]

[Energy Saver Alert]

[Menu] [Preferences] [Volume Settings]
Set whether to emit a sound when the machine enters and exits sleep mode.
[Off]
[On]

[Original in Feeder Detection Tone]

[Menu] [Preferences] [Volume Settings]
Set whether the machine beeps when it is detected that an original is loaded in the feeder.
[Off]
[On]
8WFY-0FW