Cleaning the Platen Glass
Regularly clean the platen glass and feeder or the rear of the platen glass cover to prevent originals from becoming dirty and printouts from appearing to be smudged.
If the platen glass , feeder or the rear of the platen glass cover is dirty, originals can become dirty and printouts can appear smudged after scanning, copying, or sending faxes.
If the platen glass , feeder or the rear of the platen glass cover is dirty, originals can become dirty and printouts can appear smudged after scanning, copying, or sending faxes.
1
Turn OFF the power and remove the power cord from the outlet. Turning OFF the Machine
Turning OFF the machine deletes any data waiting to be printed.
2
Open the feeder or platen glass cover.
3
Wipe the platen glass and the underside of the feeder or platen glass cover.
Wipe with a cloth soaked in water and wrung out. Next, wipe with a soft, dry cloth.
4
Allow the parts to fully dry.
5
Gently close the feeder or platen glass cover.
6
Plug the power cord into the outlet, and turn ON the machine. Turning ON the Machine